Specification Sheet

SLIDING/POCKET DOOR LOCK
Unison Hardware, Inc.
6 Wayne Court, Sacramento, CA 95829, USA
7HO)D[(PDLOLQIR#XQLVRQKDUGZDUHFRP:HEZZZLQR[SURGXFWVFRP
01
Specications
Standard Door Thickness: 1-3/4”(45mm), Thick Door Kits available
Slim Trim (SL) available for 1-3/8" (35mm) doors
Handing: Non-Handed
Thumbturn Spindle: 5x5mm square
Deadbolt: 1”(25.4mm)
Cylinder: Schlage C keyway 5 pin mortise cylinder with 2 keys (KD).
Other keys available upon request.
Keying Services available. Order Separately.
Finish
See page 12-13 for Finish options.
Application
For residential or commercial application
Material
Stainless Steel/Brass
Options
Trim Door Thickness Fixing Type
FH27.. 1-3/4" or greater Discrete
FH27..SL* 1-3/8" Face Fixing
FH27 Linear Flush Pull
For PD8000/PD5000 Sliding & Pocket Door Locks
FH27 w/PD84 FH27 w/PD50
FH2700
Flush Pull Only
Also Available:
FH2700SL
FH2703*
Flush Pull w/
Cylinder Hole
* Not available with SL
FH2782*
Flush Pull w/
TT08 Thumbturn
FH2792
Flush Pull w/
TT09 Thumbturn
Also Available:
FH2792SL
FH2704
Flush Pull w/
Thumbturn Release
Also Available:
FH2704SL
2-23/64” (60mm)
7-7/8” (200mm)
6-23/64” (161.5mm)
23/64”(9mm)
18/64”(7mm) SL
5/64” (2mm)
1-31/32” (50mm)
FH27..SL*
Note: For 1-3/8" doors, order FH27..SL Face Fixing Trim. Standard FH27 Flush Trim cannot be installed on 1-3/8" doors.
FH2792SL Slim Trim w/PD84