Product Manual

16
CARRY CASE CONFIGURATION INSTRUCTIONS
The Carry Case can be configured as a shoulder bag, backpack,
waist pack or briefcase using the adjustable straps and/or briefcase
handle. Below are instructions for configuring the backpack.
BACKPACK
1. Adjust each strap to make sure they are the same length.
2. Unfold the snaps that are tucked into the mesh pocket on the
backside of the Carry Case.
3. Attach one strap to the top left and bottom right snaps on the Carry
Case making sure the shoulder pad is near the top clip.
4. Attach the second strap to the top right and bottom left snaps on the
Carry Case making sure the shoulder strap is near the top clip.
5. Form an “X” with the straps at the top and slide arms into the configuration
as if putting on a backpack. Assistance may be required with this step.
6. Adjust straps as needed. Assistance may be required with this step.
The LifeChoice Activox POC is approved by the FAA for use on
commercial aircraft. The FAA-approved POC list shows “Inova Labs
LifeChoice Activox.” This approval is listed as a part of the labeling
on the bottom panel of the device. As every airline has specific
information required for traveling with oxygen you should review
your airline’s specific requirements in addition to following the
instructions below.
1. Two weeks prior to your trip, verify that the Internal and, if
purchased, External Battery runtimes will provide you with enough
battery life for the trip. Typically, airlines require you to have
enough battery life for 1.5 times the flying duration.
2. Fully charge the Internal and, if purchased, External Battery
within 24 hours of a trip. Keep the device connected to a power
supply until you leave.
3. Pack all required accessories (AC and DC Power Supplies,
Operator’s Manual, small extension cord, etc.)
4. Download and complete the “Physician Statement” from
www.InovaLabs.com. Bring the signed and completed Physician
Statement to the airport and be ready to provide it to the airline if
requested.
FLYING WITH YOUR POC