User's Manual

Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 14 of 17
Text Message Viewing Menu
Figure 5
Sending Pre-Programmed Text Messages
The MMH has several standard text messaged pre-programmed. To send on of these
messages press the Diamond () Key labeled ‘Txt’ in the Home Menu. Next Press the Triangle
(▼) key labeled ‘Sel’. This will bring up a menu displaying pre-programmed messages. Use
the Triangle (▲) (▼) Keys to scroll through the messages. You may also use the number keys
to jump to a message. Once the message you wish to send is selected, press the Square ()
Key labeled ‘Ok’.
The text message is now shown in the middle of the display. If it is longer than can be
displayed on the screen, you can use the Triangle (▲) (▼) Keys to scroll through the message.
The message destination is shown at the top left of the display. By default, the destination is the
currently selected group.
You may change the destination group using the group knob. You may also send messages to
individual handsets or to the MOC by pressing the Square () Key labeled ‘To:’ and then
selecting the destination using the Triangle (▲) (▼) Keys.
To send a message to a specific handset press the Triangle (▲) (▼) Key labeled ‘ID’ and then
use the keypad to enter the ID of the handset you wish to text.
To send a message to the MOC press the Triangle (▲) (▼) Key labeled ‘MOC’.
Press the Diamond () Key labeled ‘Snd’ to send your message once you have selected the
correct destination.