User's Manual

Revised: 9/12/2017 5520-16-0281 Rev: C
Proprietary and Confidential Page 14 of 15
4.5 EXTERNAL ENCLOSURE FOR VEHICLE MOUNTING OR ASSET TRACKING (FAP5015-027)
The FAA9100-310 Enclosure Assembly is available as a separate accessory for the Tracking Tag. For
applications requiring MSHA Intrinsic Safety approval, the FAA9100-310 Enclosure Assembly is required
when mounting the Tracking Tag to a vehicle or using the Tag to track material/assets (see Section 2.1).
The external enclosure has an internal gasket for protection against dust and water ingress, four captive
lid screws, and a foam insert. Mounting flanges on the enclosure allow options for mounting to vehicles,
pallets of material, or other assets.
Figure 14 – FAA9100-310 Enclosure with mounting flanges
5.0 ADDITIONAL ASSISTANCE
If you have any issues with your Tracking Tag that require assistance, contact your authorized dealer.
Mounting
Flange