Installation Manual

Page 6 of 15
Issuer: Cara Stephens Doc. Num.: 6640-08-0035 Rev: A
Revised: November 21, 2008
Approval:
3.0 SPECIFICATIONS FOR FAP4210-001 / FAP2210-001
ENVIRONMENTAL
Operating Temperature -30 to +60C ambient
Dimensions 11.8” x 11” x 4.25”
Weight 11.4 lbs
Enclosure IP65
POWER
Main DC
Connector Universal Mate-N-Lock (keyed)
Voltage +13V - +26VDC
Current 0.15A
avg
, 0.40A
peak
@ 24VDC
Current w/ battery charging 0.30A
avg
, 0.40A
peak
@ 24VDC
IS Battery (Optional)
Connector Universal Mate-N-Lock (keyed)
Voltage +5.9V to +7.2VDC (Open-Circuit)
Current 1.2A
avg
, 3.5A
peak
@ 6.9VDC (O.C. Bat.)
ELECTRICAL
Frequency Range 902 – 928 MHz
Receiver Sensitivity
1
-100 dBm
RF Transmit Power – below ground +28 dBm
RF Transmit Power – above ground +13 dBm
RF input/output 50 ohms nominal (N connector)
Voice channels/FMN
2
4 channels
Data channels/FMN 2 channels, 250 kbps
Note 1 Conducted sensitivity measured at BER < 2%
Note 2 Supports 4 simultaneous voice calls (TDMA)