Instruction Manual

MAINTENANCE/PROPER HANDLING
Handling Vinyl Records
• Do not touch the record’s grooves. Only handle records by the edges or the
label with clean hands. Touching the record surface will cause your record’s
quality to deteriorate.
• To clean a record, use a soft anti-static cloth to gently wipe the record surface.
• Keep records in their protective sleeves when not in use.
• Always store records upright on their edges.
• Avoid placing records in direct sunlight, close to a heat source
(radiators, stoves, etc.), or in a location subject to vibration, excessive dust,
heat, cold or moisture.
How to Replace the Turntable Stylus (Replacement Needle# ITNP-S1)
The stylus should last about 50 hours under normal use. However, it is recommenced that the stylus
be replaced as soon as you notice a change in sound quality. Prolonged use of a worn-out stylus
may damage the record. The highest speed of 78 RPM records would wear
out the stylus more quickly.
Removing the Stylus from the Cartridge
1. Set a screwdriver at the tip of the stylus and push
down to the direction “A”.
WARNING: When applying force to stylus, too much
may damage or break the stylus.
2. Pull the stylus out toward the direction “B”.
Installing the Stylus
1. Hold the tip of the stylus and insert the other edge
by pressing toward direction “C”.
2. Push the stylus up toward direction “D” until it locks at the tip.
Caution:
• Do not remove or bend the stylus needle.
• Don not touch the needle to avoid injury to your hand.
• Turn off the unit’s power before you replace the stylus.
• Keep out of reach of children.
8