Safety Instructions

LISTENING TO A VINYL RECORD

1. Turn the unit ON by pressing the POWER button.

2. Press the PHONO button to enter the PHONO mode.

3. Gently open the dust cover.

4. Put the record on the turntable. Select the speed. When playing a

45 RPM record, use the included 45 adaptor.

5. Gently push the Tone Arm holder to the right to release the Tone Arm.

6. Raise the to lift the Tone Arm off the tone arm support.

7. Move the Tone Arm gently to the edge of the record

(or the starting point of the track).The turntable will begin to turn.

8. Gently lower the Tone Arm by slowly releasing the Cue Lever.

You can lower the Tone Arm manually if the Cue Lever

has not been raised.

9. Turn the Volume Knob to adjust the volume.

Cue Lever

LISTENING TO AN EXTERNAL DEVICE(AUX MODE)

LINE-OUT Jacks on the BACK of the unit:

If you play this device through external powered speakers,

you can connect the unit with an RCA component cable

(not inclued).Make sure to connect the white plug to the white

jack(left) and the red plug to the red jack(right).

LISTENING TO THE FM RADIO

1. Press the FM/

2. Press SEARCH/ button, the unit will search the stations and store the

stations it searches automatically.

NOTE: You can press SEARCH/ button again to stop searching.

3. Press and hold SEARCH/ button to search stations manually.,.

4. Press and hold the FM/ or BT/ button to skip to the previous/next stored

station.

Adjusting for Best Reception

FM broadcast: Extend and reposition the FM antenna.

10. When playback has finished, slightly lift the Tone Arm using the

Cue Lever and return it to the Tone Arm holder.

button to enter the FM mode.