Safety Instructions

TROUBLESHOOTING GUIDE
symptom
GENERAL
Uint will not power on
Possible Cause
Unit is unplugged.
Solution
Connect the DC power
adapter to the jack.
No sound output from
speakers
The volume level is set
too low.
The input selector does
not match the playback
source.
Adjust the volume.
Select the correct
input source.
• Noise/Distortion in
sound output
The unit is too close to
a TV set or another
interfering device.
Turn off the TV or
other appliance, and
relocate the unit.
• Unit fails to respond
• It might result from
externa factors such as
ESD(Electro-static
discharge).
• Disconnect the power
cord and external
audio device.Re-plug
the power cord after
one mimute.
FM RADIO
• Cannot listen to any
station, or signal
appears weak
The station is not
tuned-in properly.
A TV set is being used
nearby and is interfering
with the radio reception.
Properly turn-in the
desired station.
Turn off the interfering
TV set.
• The sound is distorted
• The antenna is not
oriented properly.
• Re-orient the antenna
until reception
improves.
PHONO
• Decline in turntable
audio performance
• The turntable stylus is
worn out.
• Replace the stylus.
10