User's Manual

Table Of Contents

LISTENING TO A RECORD

Before operation, detach the stylus

guard ( white plastic cover ) by

3. Slide the BT/PHONO switch to PHONO mode. Place a record on the center spindle.

Note: If you are playing a 45 RPM Single (small size record), place the 45 RPM adapter

to the center spindle

then place the record on it.

5. Unlock the Tone Arm from the holder as the illustrated below:

Clip

6. Raise the Cue Lever to raising the Tone Arm then move it to the top of the desired location

7. When finished playing, move the Tone Arm back to Holder.

of the record. Release the

Lever to put the Tone Arm onto the record. It will start playing.

Release the Cue Lever then lock the Tone Arm on the Holder.

Cue Lever

pulling it straight off the front of

the cartridge.

NOTE:

Note:

Do not insert the LINE IN Cable into the LINE IN jack of the Main speaker.

NOTE: Press the PAIR button to pair with the two speakers if connection is unsuccessful.

1. Switch on the two speakers first, wait both speaker paird with each other, the Indicator on main

speaker will flash when connected.

turntable will be paired to the two speakers automatically, and the

bluetooth indicator on turntable will flash, after a few seconds, the

2. Switch on the turntable,

bluetooth indicator on turntable

will stay lit.

4. Slide the Speed selector to 33 or 45 to

match the play speed of the record.

with the turntable.

Press and hold the button on main speaker to disconnect the connection

Please restart both speakers and the Turntable if all of them are not responding.