Model:VH-40 BT SPEAKER TABLE
1 CONTENTS IMPORTANT SAFETY INSTRUCTIONS..................................................................................... 2 ACCESSORIES INCLUDED ....................................................................................................... 4 INSTALLING YOUR TABLE......................................................................................................... 5 INSTALLING THE TIPPING RESTRAINT PACK ........................................................................
- This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. - Warning: To reduce the risk of electric shock,do not remove cover (or back) as there are no user-serviceable parts insides. Refer servicing to qualified personnel.
15. - This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. - Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no userserviceable parts inside. Refer servicing to qualified personnel.
ACCESSORIES INCLUDED Unpack the box and verify that the following items are included: Main Unit A Wood Dowels #1 X1 Knob Bolts Side Board X1 B #2 Unit Legs C X2 X3 “L” Bracket #3 X4 X1 Screws * D #4 X3 X4 Power Cords RCA Cable E Touch-up Pen X1 #5 Tipping Restraint Pack Remote Control F X1 X1 #6 X1 Dry Batteries G X2 * One set includes 1 safety strap, 2 buckles, 2 rubber stoppers and 4 screws.
INSTALLING YOUR TABLE IMPORTANT NOTES: Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. We recommend using two people for assembly. Step 1: Installing the Side Board Attach the Side Board(included) to the table by using the Knob Bolts(included) and Wood Dowels(included). See pictured insert.
INSTALLING THE TIPPING RESTRAINT PACK Installing the Tipping Restraint Pack helps prevent table tip over during minor earth tremors. * One set tipping restraint pack includes 1 safety strap, 2 buckles, 2 rubber stoppers and 4 screws. Safety Strap X 1 Rubber Stopper X 2 Buckles X 2 Screws X 4 Installing the Tipping Restraint Pack 1. 2. 3. 4. 5. 6. 7. Locate two wall studs behind your table. Position a buckle on each stud below the top of the table.
CONNECTING TO THE POWER IMPORTANT NOTES: Three power cords with different plugs are included. Depending on your region, select and use an appropriate one. CAUTION: Only use the AC Power Cords supplied with this device. Do not use a power supply from another device or manufacturer. Using any other power cords or power supply may cause damage to the device and your warranty. 1. 2. Insert the AC Power Cord (included) to the AC INLET (AC IN) of the table. Connect the correct power cord to the wall socket.
PRODUCT OVERVIEW Control Panel 1. STANDBY/ON-OFF • • 2. MODE/SOURCE • • 3. Press the button repeatedly to switch to different playback mode. Hold the button for 3-5 second to set as the Vice unit. PREVIOUS • • 4. Turn ON the unit or switch the unit to Standby mode. Hold the button for 3-5 seconds to set as the Master unit. Press to go to the previous track. Notes: Function supports only in Bluetooth and USB playback modes. Hold the button for 3-5 seconds to decrease the volume level.
STATUS LED Status LED Indicators LED Indicator-1 LED Indicator-2 Status LED Table (No TWS Connection) Device Operation Mode LED Indicator-1 Action LED Indicator-2 Action Standby Mode RED (solid) – Connecting: BLUE ( blink slowly) – Connected: BLUE (solid) – AUX IN Mode – ORANGE (solid) Optical Input Mode – WHITE (solid) Coaxial Input Mode RED (solid) WHITE (solid) HDMI (ARC) Mode PURPLE (solid) – USB Playback Mode BLUE (solid) ORANGE (solid) Bluetooth Mode Notes: • The LED Indica
REMOTE CONTROL Buttons Function 13 1. 1 STANDBY/ON-OFF • • 2. MUTE • • • 3. • 5. 10 11 12 Increase/decease the volume level. Used to adjust the sound effect. MODE • • 13. Press once to pause the playback, press again to resume. Notes: Function supports only in Bluetooth and USB playback modes. In Bluetooth mode, hold the button for 3-5 seconds to disconnect the Bluetooth connection. Press the button again to reconnect.
CONNECTING A TV HDMI(ARC) The ARC (Audio Return Channel) function allows you to send audio from your ARC-compliant TV to your unit through a single HDMI connection. To enjoy the ARC function, please ensure your TV is ARC compliant and set up accordingly. The setting method of ARC may differ depending on your TV model. For details regarding the ARC function, please refer to your TV owner’s manual. Using HDMI (ARC) 1. 2. 3.
CONNECTING ANOTHER DEVICE Connecting an audio playback device Connect to COAXIAL IN, OPTICAL IN or AUX IN input to an audio playback device (CD player, portable music player, etc...) using the appropriate cables. AUDIO OUTPUT DIGITAL AUDIO COAXIAL OUTPUT DIGITAL AUDIO OPTICAL OUTPUT Audio Device Connecting a USB storage device Connect a FAT32 formatted USB storage device containing music files to the USB Playback Port. Notes: The maximum USB memory size is 32GB.
GENERAL OPERATIONS POWER ON THE DEVICE Select an appropriate power cord (included) and plug it into the AC INLET (AC IN). Switch the POWER SWITCH to ON. It is strongly recommended that this product should be operated only from the type of power source marked on the rating label. STANDBY 1. Press the STANDBY/ON-OFF button on the panel or remote control to turn on the unit or enter Standby mode. NOTES: The LED Indicator-1 will be lit in RED Color when in Standby mode. 2.
BLUETOOTH OPERATION 1. 2. 3. Press the MODE button on the panel or remote control to enter Bluetooth mode. Once enter Bluetooth mode, the LED Indicator-1 will slowly blink in Blue color. Go to Bluetooth settings on your device. Make sure your device’s Bluetooth feature is set to ON. From the Bluetooth list on your device, select < VH-40 >. Once successfully connected, a prompt voice will be came, and the LED Indicator-1 will stop blinking and solid in Blue color.
COAXIAL IN OPERATION 1. 2. 3. Press the MODE button on panel or remote control to enter COAXIAL Input mode. Once enter, the LED Indicator-1 will be lit up in solid Red and LED Indicator-2 in solid White color at the same time. Use an “RCA”-type cable to connect your television’s coaxial digital audio output to the unit’s COAXIAL INPUT CONNECTOR. Other components connected to the television, such as a DVD/Blu-ray player or cable/satellite tuner, will automatically play through the unit.
TWS CONNECTION VH-40 supports two or more VH-40 paired and shared audio perfect sync with no delay. Notes: You can also connect VH-40 to your Smart Home Devices(VH-XX series products, including VH-15, VH-20, VH-25, VH-35 and VH-40) over Bluetooth. How to Set Two Or More VH-40 into TWS Mode: 1. 2. Power on the VH-40 speakers first. Hold the STANDBY/ON-OFF button on one of the speakers for 3-5 seconds to set it as the Master unit.
TWS CONNECTION OPERATING IN TWS MODE (Before that, set the Master and Vice unit at fist) : IMPORTANCE: • Mode can only be switched via the Master unit. If change the modes via the Vice unit, the TWS connection on the Vice unit will be disconnected automatically. • Press any buttons of the Vice unit, the Master unit will not be synchronized. • The volume level for the Master and Vice unit is independently controlled. They need to be adjusted separately.
TWS CONNECTION OPTICAL OPERATION: 1. Press the MODE button of the Master unit to enter Optical Mode. The White LED indicator on the Master unit will be lit up and start blinking. 2. Use the digital optical cable to connect your television’s optical digital output to the OPTICAL INPUT JACK on the Master unit. Other components connected to the television, such as a DVD/Blu-ray player on cable/satelilte tuner, will automatically play through the Master and Vice units at the same time. COAXIAL OPERATION: 1.
SPECIFICATIONS GENERAL Power Requirements ......................................................................AC 100-240V~ 50/60Hz Power Consumption.......................................................................80W AMPLIFIER Output Power ..................................................................................2 x 20W + 40W Frequency Response.......................................................................Suwoofer: 20 to 200 Hz .......................................................
TWS CONNECTON AUX BLUETOOTH GENERAL TROUBLESHOOTING GUIDE Symptom Possible Cause Solution • Unit will not power on. • Unit is unplugged. • Connect the unit to the AC power supply. • Unit will not turn on. • Power switch have not turned on. • Turn the Power Switch to On. • No sound output from speakers. • The volume level is set too low. • Mute the sound. • The input selector does not match the playback source. • Adjust the volume. • Cancel the mute function. • Select the correct input source.
FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Victrola is a registered trademark of Innovative Technology Electronics LLC. Innovative Technology Electronics LLC. Limited Warranty: 90 Days Labor, One Year Parts Innovative Technology Electronics LLC. (IT) warrants the product to be free from “Defects” in materials under normal use for a period of “One Year” from the date of the original purchase. The Warranty is “Not” transferable.
