User Guide

ABOUT THE SLEEP CYCLE (cont.)

HOW TO KNOW THE ALARM IS SET

When the alarm is set, appears on the screen.If SLEEPTRACKER® is not used to monitor your sleep

for 24 hours or more, the alarm must be reset by going to the alarm,go to ALARM mode and pressing

and holding GLO until reappears.Hold GLO until disappears to turn off the alarm function.

GLO

SET

MODE

SLEEPTRACKER

3) Press these buttons to

set the hour, minutes,

and AM/PM/24-hour.

Please Note: GLO will not backlight

the screen in the ALARM mode.

1) Press MODE to go to the

ALARM mode.

5) Press MODE until it stops

blinking to save your

new settings.

2) Press and hold SET until the

hour digit blinks.

4) Press SET to go to mintues

or AM/PM/24-hour.