User Guide

SETTING THE ALARM

To set the ALARM mode,press the MODE button until you reach the ALARM screen,and then press and

hold SET until the hour digit blinks.Adjust to the desired hour by pressing the buttons on the left.Next,

press SET to adjust the minutes using the same buttons.Then press SET to adjust among AM/PM/24-

hour.To store these settings, press MODE until the screen stops blinking.Then press and hold the top

left button (GLO) until appears.

The must be on for SLEEPTRACKER® to record data or for

the alarm to be activated.

SHUTTING OFF THE RINGING ALARM

The alarm will ring for 30 seconds.To turn it off,press and hold the bottom left button.Press and hold

the GLO button to snooze the ringing alarm until the default alarm time. (For example, if the ALARM

time is 7:00 AM with a 20-minute window, the alarm might ring at 6:52 AM, when an almost-awake

moment occurs.Pressing GLO snoozes the alarm until 7:00 AM.)

Please note:When the blinks,SLEEPTRACKER® is acquiring data.