Submittal Sheet

IW-25-4 IN Wall
DEHUMIDIFIER
For Complete Installation Instructions Visit: HumidityHappens.com
[phone]
Example of
Dehumidifier
Placement
NOTE:
The IW-25-4 may be installed at
any height, the above example is
for illustrative purposes only.
Exterior Sleeve for IN Wall Dehumidifier Integrated Condensate Pump Built for IW25-4
Dimensions: 7 ¹/8” x 3” x 2 ³/4”
IW25-4 Optional Accessories:
Dimensions: 17 ¹/2” x 30 ¹/2” x 2 ¹/5”
The Integrated Condensate Pump
was designed for automatic collection
and removal of condensate when
gravity drainage is not possible or
practical. Pump mounts directly
into dehumidifier for tamper-proof
control.
The Exterior Sleeve allows the
IW25-4 IN Wall Dehumidifier to be
semi-recessed into the wall. Includes
punch out holes on side and bottom
for versatile drain and power routing.
The Exterior Sleeve frames the
dehumidifier for a clean fit and
clean aesthetic.