Submittal Sheet

PROO F
MECHANICAL DEHUMIDIFICATION UNITS 23 84 16
Innovative Dehumidifier Systems LLC
1
Spec-Data
®
is a registered trademark of CMD. The ten-part Spec-Data format conforms to the editorial style of The Construction Specifications Institute
and is used with their permission. The manufacturer is responsible for technical accuracy. ©2015 CMD. All Rights Reserved.
1. Product Name
IW25-3 Dehumidifi
er
2. Manufacturer
Innovative Dehumidifier Systems LLC
6260 Ocean Highway W
Ocean Isle Beach, NC 28469
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.innovativedehumidifiers.com
3. Product Description
Basic Use
IW25-3 by Innovative Dehumidi
fier Systems LLC is a self-contained,
ENERGY STAR® certified dehumidifier that can be installed
permanently to interior walls, including masonry or CMU block.
Designed to fit between 16 inch o.c. wall studs, a single unit
controls relative humidity for spaces to 1500 square feet and
drains directly into a hub drain or plumbing line — eliminating
the need for reservoir tanks. IW25-3 can be connected to a
standard 120V outlet or can be hard-wired.
IW
25-3 operates at sound levels lower than 47 dbA, effectively
removing excessive moisture without sacrificing comfort or ambiance.
It is suited for both new construction and retrofit i nstallations i n
multifamily, commercial, educational and industrial applications.
Composition and Materials
The enclosure is 1.2 mm thick steel at the bottom panel and 1 mm
thick at other panels. The built-in humidistat is protected by a tamper-
proof 5VA-rated ABS cover, which is 2.5 mm thick and secured with
tamper-resistant screws to restrict access. Components that make up
the system include a washable air filter, drain connector, drain tube,
PCB control board with built-in safety switch or auxiliary contacts for
condensate pump, humidity sensor, drain hose and filter.
Size
 Rough opening dimensions: 14.5" × 25.5" × 9.38"
 Grill/cover: 17.2" × 27.2" × 0.5"
 Weight: 35 lbs
Color
White
Benefits
 Tamper-proof, access lock-out cover protects unit
 Quiet — operates at 47 decibels or lower
 Energy Star efficient — averages 285 watts power
consumption
 Tank-free, automatic drain eliminates damage from
overflowing reservoirs
 Relative humidity set point can be adjusted from 30–90%
 Uses standard 120V AC
 Epoxy coating on coil improves IAQ, prevents corrosion and
extends the unit life expectancy
 Drains to existing plumbing and can be hard piped
 Automatic restart after power interruption
Restrictions
IW25-3 is design
ed for indoor use only.
Accessories, Options
 Built-in auto-dehumidistat
 Drain connector
 Internal drain tube
 Drain hose (3/4" × 10')
 Front cover tool
 Surface mounting box (optional)
 Condensate pump kits (optional)