User's Manual

Accutech reserves the right to substitute comparable components without notice.
CUT SHEET: Multiplexer
The Multiplexer, used only in IS 3200 and BR 4200 Systems, relays event information sent from the Controller and
Receivers to Graphic Display Panel(s) and to PCs with the Accutech Software. The Multiplexer comes inside a Controller
case; this case can accommodate up to 2 Multiplexer boards (16 Zones).
ELECTRICAL:
Operating Voltage: External 12V DC regulated power
supply, Emergency backup located within 6 feet of the
Multiplexer recommended
Current Consumption: 350 mA per 8-zone board
Output: RS232
MECHANICAL:
Construction: Metal case
Size: 16.00” x 9.60” x 3.25”
Weight: 10 US pounds (2 Multiplexers in enclosure)
ENVIRONMENTAL:
Operating Temperature: 32º to 120º Fahrenheit
Intended for indoor use only.
DUTY CYCLE:
Rated for continuous use.
Multiplexer
Model Number: MX18, MX916
Part Number:
770177 (MX18),770277 (M916)
UL Listed 294 (BP9480)
Access Control Accessory
A Multiplexer board
800-356-2671 | Accutech | www.accutech-ics.com