User's Manual

Accutech reserves the right to substitute comparable components without notice.
CUT SHEET: LED Tag
DISCLAIMER: Due to each facility’s unique environment, a LED Tag cannot give an exact measurement of zone coverage;
it can only give an estimation of zone coverage. Furthermore, at this time, the LED Tag is not able to test Auxiliary Band
Removal Receivers.
A LED Tag is used to verify proper zone coverage during installation, adjustment, or testing of a monitored zone.
Proper zone coverage fully protects the intended area (door, elevator, hallway, or any other passageway) without extending
into other areas (in front, in back, on sides, above, and beneath the intended area).
Monitored zones emit a Tag-activating signal called the Tx Activation Field. When a Tag enters a zone’s Tx Activation
Field, the system will detect the Tag and take appropriate action response.
A LED Tag can enter and detect a zone’s Tx Activation Field without causing alarms making it a quick and easy way to
verify proper zone coverage. This is not only useful in ensuring complete zone coverage but also in locating areas where a Tx
Activation Field may be extending into common areas and causing nuisance alarms.
ELECTRICAL:
LED Tags operate by internal battery.
The Tags have been engineered for greater than 12 months usage
and can be activated/deactivated with a TAD.
MECHANICAL:
Size: 1½” x 1½” x ½ “
Weight: 1 ounce
OPERATING CHARACTERISTICS:
LED on: Indicates 131 kHz signal present
(Tx Activation Field)
MAINTENANCE:
Keep the Tags dry and never submerge them.
Acceptable cleaning methods:
Antibacterial wipes or Hydrogen peroxide (wipe, do not soak)
TESTING:
There are 3 ways that you can test LED Tags:
 Enter a monitored zone (LED will light)
 With a TAD
 With a PTAD
STORING
Ideally, to preserve battery life, LED Tags should be turned off
with
a TAD, stored away from sources of electrical noise, and stored in a
metal container with lid.
ENVIRONMENTAL:
Operating Temperature: 32º to 120º Fahrenheit
Intended for indoor use only.
LED Tag
Model Number: LED
Part Number: 660008
800-356-2671 | Accutech | www.accutech-ics.com