User's Manual

Accutech reserves the right to substitute comparable components without notice.
CUT SHEET: Keypad
The Keypad is used to escort residents through a monitored zone and to reset zone equipment once an alarm has occurred.
Up to 56 different (3 to 8 digit) user codes can be used to reset the alarm and to activate the Escort function.
ELECTRICAL:
Operating Voltage:
UL rated at 12V DC
Manufacturer rated at 9 to 16V DC
Stand-by Current Drain: 15 mA typical
Current Drain with outputs active: 55 mA typical
Contacts: 10 A / 30V AC/DC
Cable: minimum 22-gauge, 4-conductor
MECHANICAL:
Size: 4-5/8” x 2-7/8” x 1-3/8”
Weight: 4.3 ounces
Mounting: Flush or Surface Mount
*Metal box not recommended
OPERATING CHARACTERISTICS:
Power Failure: EEPROM retains programmed data
during power failures.
Relay Control: Programmable 1-98 seconds
LED Status:
Green – Escort or Reset
Yellow – Power
Red - Alarm
ENVIRONMENTAL:
Operating Temperature: 32º to 120º Fahrenheit
Intended for indoor use only.
DUTY CYCLE:
Rated for continuous use.
Keypad (Flush Mount)
(box not included)
Model Number: KD
Part Number: 650202
UL Listed 294 (BP9480)
Access Control Accessory
Keypad (Surface Mount)
800-356-2671 | Accutech | www.accutech-ics.com