User's Manual

Accutech reserves the right to substitute comparable components without notice.
CUT SHEET: Fire Panel Interface (FPI)
The Fire Panel Interface (FPI) ensures, in the event of a fire, the Magnetic Lock(s) and/or Elevator Deactivation Circuitry
will be disengaged. Accutech follows NFPA codes and regulations. Therefore, in the event of a fire, all Accutech restraints
will be disabled (audial and visual alarms remain intact).
For each FPI unit used, one set of dry contacts will be needed from the facility’s fire panel.
Each FPI unit provides dry contact outputs for up to eight Controllers.
ELECTRICAL:
Operating Voltage: 12V DC
Current Consumption: 120 mA maximum
Contact Rating: 2 amps/24V DC
Cable: needs minimum 22-gauge, 2-conductor
non-shielded to each Controller
MECHANICAL:
Enclosure size: 6.29” x 5.68” x 2.00”
Weight: 25 ounces
OPERATING CHARACTERISTICS:
Fire Panel Alarm State: Open contacts
Contact State: N.O. during alarm state
N.C. during operating state
ENVIRONMENTAL:
Operating Temperature: 32º to 120º Fahrenheit
Intended for indoor use only.
Fire Panel Interface (FPI)
Model Number: FPI
Part Number: 700013
UL Listed 294 (BP9480)
Access Control Accessory
800-356-2671 | Accutech | www.accutech-ics.com