User's Manual

Accutech reserves the right to substitute comparable components without notice.
CUT SHEET: BR 4200 Auxiliary Receiver
BR 4200 Auxiliary Receivers only monitor Band Removal and Band Compromise events. They monitor approximately 40
feet outward in every direction; therefore, they should be positioned 70 feet apart to avoid confusion about the location of a
Band Removal alarm.
When choosing the location and number of Auxiliary Receivers, be sure to consider the following:
 the facility’s structure (i.e., concrete/metal lathe as opposed to drywall walls or foil-backed ceiling tiles).
 keep a minimum distance of 4 feet away from fluorescent lighting and air handling equipment.
 Band Removal alarms can be generated anywhere within a facility, not just exit points; this includes bathrooms,
visiting areas, storage rooms, and laundry rooms.
ELECTRICAL:
Operating Voltage: 12V DC regulated
Current Consumption: 50 mA maximum
Cable: needs minimum 22-gauge, 6-conductor
MECHANICAL:
Size: Mounted in a 4” x 4” x 2” electrical box.
*Allow 7” depth for clearance of the BNC Rubber
Duck antenna
Weight: 1 lb. 4.5 oz. total
(Rx + Box + Duck)
OPERATING CHARACTERISTICS:
Transmit Frequency: 418 MHz
Receive Frequency: 418 MHz
Frequency range: 40 feet radius (360º)
Jumpers settings:
JP1
(SS) Off
JP2 (Rx Test) Off
JP3 (Tag D) Off
JP4 (BR) On
JP5 (Reset) Off
ENVIRONMETNAL:
Operating Temperature: 32º to 120º Fahrenheit
Intended for indoor use only.
DUTY CYCLE:
Rated for continuous use.
BR 4200 Auxiliary Receiver
Model Number: ESRR
Part Number: 670076
UL Listed 294 (BP9480)
Access Control Accessory
BR 4200 Auxiliary Receiver (PCB)
800-356-2671 | Accutech | www.accutech-ics.com