User's Manual

Accutech reserves the right to substitute comparable components without notice.
CUT SHEET: Accutech Software
Accutech Security Systems are NOT computer-dependant.
The Software is for reporting purposes only and does not affect nor control the physical Accutech Security System.
The Accutech Software is installed on each monitoring PC and is used to display incoming event information. Using the
facility’s floor plan as the background, zone-specific icons (i.e., doors, elevators, stairwells, hallways, and BR 4200
Auxiliary Receivers) are placed at each monitored zone’s location and become animated when an alarm occurs.
KEY FEATURES:
 Floor plans can be monitored locally or remotely.
 Customizable event handling (displaying, logging, clearing)
 Password protected operations
 Tags are assigned to specific patients, residents, infants, or assets.
 Customizable printable Reports (sort by start/end date, event type, zone, and/or patient)
MINIMUM SYSTEM REQUIREMENTS:
 1.80 GHz processor
 17” CRT Monitor (capable of displaying 1024x768
pixels in 16-bit high color)
 20 GB Hard Drive
 1 GIG DDR2 RAM
 Integrated Video
 32x CD-ROM Drive
 Keyboard
 Mouse
 Mouse Pad
 Speakers (or integrated sound)
 Windows 2000 SP4 or Windows XP SP2
 1 Serial 9pin COM PORT
RECOMMENEDED:
 2.33 GHz processor or higher, 1333 FSB
 17” LCD Flat Panel Monitor (capable of displaying
1280 x1024 pixels in 32-bit high color)
 80 GB Hard Drive
 2 GIG DDR2 RAM, Non-ECC, 887 MHz
 Integrated Video
 24x CD-RW/DVD Combo Drive
 USB Keyboard
 USB Mouse
 Mouse Pad
 Speakers (or integrated sound)
 Windows XP SP2
 1 Serial 9pin COM PORT
Software Screenshot example
Model Number: SW
Part Number: 700169
If networking multiple computers:
 10/100 Network Interface Card (NIC) in each PC
 Cross over cable, if networking only 2 Accutech
PCs10/100 Workgroup Switch or Hub, if
networking more than 2 Accutech PCs
800-356-2671 | Accutech | www.accutech-ics.com