User's Manual

Installation Manual Appendix D-5

LED14 (Supervisor Indicator)

LED14 (Supervisor Indicator) indicates if there is a problem with the system’s Tx wand antenna(s)

and/or Receiver(s).

LED14 is a visual indicator of supervisor status; therefore you can troubleshoot without having to

listen to the piezo buzzer alarm. You may silence the piezo buzzer alarm by removing jumper

JP13 on the Controller.

NOTE: If LED14 indicates any sort of problem, before moving to more advanced troubleshooting

steps, first check all wire connections on the Controller, the Tx wand antenna(s), the Receiver(s)

and any splices at junction boxes.

LED14 Status, Color Type of Problem Refer to Caused By

Off n/a n/a n/a

On, Yellow Tx wand antenna

and Receiver-