User's Manual

Installation Manual The Keypad 7-9
6. To quit programming at this stage, press
# while the green LED is flashing
slowly.
Adjusting the Keypad Escort Time
To adjust the Keypad Escort Time, use the
following instructions:
1. Access the programming menu by
entering **, [master code], **.
With the programming menu active, the
green LED will flash slowly.
2. Enter “2” to select the relay timer
function.
The green LED will respond by flashing
rapidly, indicating that the Keypad is
ready to receive data.
3. Enter the escort time (two digits, from
1-98 seconds) followed by the # sign.
The green LED will light steadily for 2
seconds and then will resume rapid
flashing.
4. To exit, press # while the green LED is
flashing slowly.