User's Manual

Installation Manual The Accutech Systems 1-9
Figure 1.12
Transmit (Tx) wand antenna
(shown without cover)
The Transmit (Tx) wand antenna
The Transmit (Tx) wand antenna (Figure 1.12) generates a Tag-
activating signal near a monitored zone. This signal is referred to as
the “Tx Activation Field.”
Figure 1.13
Receiver (remote shown)
The Receiver
The Receiver (Figure 1.13) picks up the signal from an activated tag
and relays it to the Controller and the Multiplexer. Receivers can be
internally or remotely mounted near a monitored zone. BR 4200 Zone
Receivers monitor both zone events and Band Removal events. BR
4200 Auxiliary Receivers only monitor Band Removal events.
Figure 1.14 Keypad
The Keypad
The Keypad (Figure 1.14) is used to escort residents through a
monitored zone and to reset zone equipment once an alarm has
occurred.
Figure 1.15
Push Button Override (PBO)
The Push Button Override (PBO)
The Push Button Override (PBO) (Figure 1.15) triggers the Keypad’s
Escort function; this option allows free access through a monitored
door from the non-Keypad side of the door.