User Manual
Table Of Contents
- LC 1200 Manual (v1.00)
- FCC Statement of Conditions
- Warranty Statement
- How to use this manual
- Table of Contents
- Ch. 1 - The LC 1200 System
- Ch. 2 - The LC unit
- Ch. 3 - Tags & TAD
- Ch. 4 - The Magnetic Switch
- Ch. 5. - Passive Infrared Reader (PIR)
- Ch. 6 - The Keypad
- Ch. 7 - Push Button Override (PBO)
- Ch. 8 - External Sounders
- Ch. 9 - Magnetic Locks
- Ch. 10 - Elevator Deactivation
- Ch. 11 - Automatic Door Deactivation
- Ch. 12 - Fire Panel Interface (FPI)
- Ch. 13 - Timer
- Ch. 14. - Alert Panels
- Ch. 15 - System Maintenance & Testing
- Ch. 16 - FAQ & Troubleshooting
- Appendix A: Component Cut Sheets
- Glossary
- Index
Accutech reserves the right to substitute comparable components without notice.
R051903
M090503
CUT SHEET: Graphic Display Panel (GDP)
A Graphic Display Panel (GDP) provides the staff with a visual representation of the floor being monitored. GDPs are
custom-made to a facility’s floor plan and notify staff when an alarm or event occurs in a monitored zone through a piezo
buzzer and alarm-specific LEDs. Each monitored zone is labeled and marked with an LED that will light to indicate that an
Alarm Condition has occurred for that particular zone. In addition, a “Fire Alarm” LED will light on the display if the fire
circuit is activated.
ELECTRICAL:
Operating Voltage: 12V DC
Current Consumption: 60 mA per 8-zone board
Cable: Dependant on number of zones + 3
MECHANICAL:
Sizes available: 11”x17”, 13”x19”, custom
Weight: dependant on size, number of zone
(approximately 5 US pounds)
OPERATING CHARACTERISTICS:
Pre-selected color themes or custom color matching
available.
Built-in Sounder
ENVIRONMENTAL:
Operating Temperature: 32º to 120º Fahrenheit
Intended for indoor use only.
DUTY CYCLE:
Rated for continuous use.
Graphic Display Panel (GDP) example
Model Number: GDP
800-356-2671 | Accutech | www.accutech-ics.com