User's Manual

What is an MBM Tag?
MBM (Mother Baby Match) Tags are used for matching purposes only
and should not be used for infants or PEDS applications. MBM Tags will
not be detected in a monitored exit and will not cause alarms or lock
doors. MBM Tags have orange colored bases to differentiate them from
standard Tags. The MBM Tag’s visual pulse LED indicates whether the
Tag is active. MBM Tag are activated/deactivated (to preserve battery
life) using an ID-TAD.
ACTIVATING/DEACTIVATING MBM TAGS
To activate or deactivate tags, See Activating/Deactivating Tags
A MBM Tag only transmits for a few seconds when first introduced to
monitored zone or an ID-TAD (so as not to cause alarms or lock doors).
How are MBM Tags Matched with Infant Tags?
Standard Tags are worn by infants and are available in different Tag case
styles such as BR or Cut Band. MBM Tags are worn by the
mother/father. Both Tags contain matching programming that can be read
privately by an ID-TAD without alerting bystanders of a valid match or
mismatch.
Start with the MBM Tag and the matching sequence is as follows:
1. Power up the ID-TAD and starting at the ACCUTECH
Screen (no need to unlock the ID-TAD for MBM Match),
press the M button (1) and then read the MBM Tag by placing
the ID-TAD over the MBM tag. The screen will display
MOM and tag number (2) along with 1 short beep. The MBM Tag
information is then stored for 5 minutes. During this time, travel to
the Infant Tag’s location.
2. Match the Infant Tag by placing the ID-TAD over the
BR or CB tag. If the Tag is a match, then BABY and the tag number
(3) will be displayed along with 1 short beep. If the Tag is not a
match, then X (5) is displayed. A correct match can be attempted
by
locating the right infant within 5 minutes, to continue the process. If
you exceed this time, then you will need to start the process over.
3. Return to the MBM tag and read to confirm. If the Tag is a match,
then the screen will display MATCH and tag number (4) with a long
beep. If incorrect, X (5) will be displayed and you will need to start
the process over.
MBM Tag (orange-colored base)
1 2
3 4
5