User's Manual

ACTIVATING/DEACTIVATION TAGS

The ID-TAD can activate and deactivate Tags preserving Tag

battery life and preventing nuisance alarms.

ACTIVATING

1. Unlock the ID-TAD as previously instructed.

2. With the LCD screen in the “ID-TAD in unlocked mode

NO TAG OR TAG OFF” (2), place the Tag in the correct

orientation within the Tag receptacle (1).

3. Press the Enter button (3). “Wait turning tag on/off NO

TAG OR TAG OFF” will be displayed (4). The Tag

number will be then displayed (5) indicating the Tag is

active (also the Tag’s LED will be illuminated).

4. If a low battery condition is detected, then LB will be

displayed next to the tag number (6). Replace tag – DO

NOT KEEP ON PATIENT OR PLACE TAG ON

PATIENT. Turn tag off and use another tag.

5. If a band removal alarm condition is detected, then BR will

be displayed next to the number (7).

Note: A band alarm condition can or will take precedence

over a low tag battery condition, therefore, be sure to

handle the BR Tag appropriately to truly check for a low

battery condition.

DEACTIVATING

1. Unlock the ID-TAD as previously instructed.

2. Place the Tag in the correct orientation within the Tag

receptacle (1). The tag number will be displayed on the

screen (9)

3. Press the Enter button (10). “Wait turning tag on/off (TAG

NUMBER)” will be displayed (11). The LCD screen will

then display “NO TAG OR TAG OFF” (12) indicating the

Tag is deactivated (also the Tag’s LED will no longer be

illuminated).

2 3

4 5

6 7

9 10

11 12