User's Manual

POWERING THE IDTAD ON/OFF

The ID-TAD includes a built-in power saving feature that automatically turns

off the ID-TAD after a period of inactivity.

1. Press the Power/Clear button (1)

The LCD screen illuminates and ACCUTECH (2) is displayed.

The LCD screen will remain lit for 1 minute without button activity.

While nearing the 1minute mark, the LCD will display

“20 sec to Power off” and then “7 sec to Power off”.

To extend the length of time, press the Power/Clear button again

before the LCD screen powers down. Each press will extend by 1

minute (up to 5 minutes at a time).

2. Conversely you may manually power off the ID-TAD by pressing

and holding the Power/Clear button for 5 seconds. Once the LCD

screen powers off, you may release the button.

NOTE: The ID-TAD has an internal tag to prevent it from leaving the

monitored area. Once the ID-TAD is powered up, the internal tag no

longer functions. When the ID-TAD is not powered up, it will cause an

alarm at a monitored exit and display as tag # 254 on a computer with

Accutech software.

UNLOCKING THE ID-TAD

For added security, access to certain secure ID-TAD operations is locked via

4-digit user codes.

1. Press the Power/Clear button (1).

The LCD screen illuminates and ACCUTECH is displayed (2).

2. Using the number grid (3), enter a 4-digit user code.

Entering the code will display the * for each number entered (4). See

Programming Mode Instructions for more information on user codes.

3. Once the correct code is entered, press the Enter button (5). The

screen will display “ID-TAD in unlocked mode /NO TAG OR TAG

OFF” if there is no tag near the ID-TAD (6). If you entered the wrong

code, “Invalid Code” will be displayed. Press clear and start over.

4. You may now use the ID-TAD for activating/deactivating Tags,

testing tags and verifying tag ID data. Each action you take will

extend the Enter LED life for 1 minute (except for the Clear button).

After 1 minute of inactivity the Enter LED will extinguish and you

will have to enter a valid code again.

1 2

3 4

5 6