User's Manual

3. Set LCD Contrast, press 3. This will bring up a new screen.
“Press 0-9 for LCD Contrast” is displayed. CURRENT: 4 is the default. Pressing 0 is the lowest
and lightest. Pressing 9 is the highest.
Enter-Enter returns you to the menu screen.
4. Change Master Code, press 4. “Enter current master code” is displayed. Enter the current
master code. Then press Enter. Enter new master code” is displayed. Enter the new master code
(must be 9 digits). “Enter to change master” is displayed once the 9
th
digit is entered, then press
enter. “Master code changed” will be displayed.
Enter-Enter returns you to the menu screen.
5. Edit Unlock Codes, press 5. “Enter code to add or delete” is displayed. Enter a code to be
added or deleted. After you add the 4 digits (4 digits required) “Press 1 to add” and “Press 2 to
delete” is displayed. If you press 1, then “User code XXXX Added” is displayed. If you press 2,
then “User code XXXX deleted” is displayed.
Press Enter to return to the previous screen to add or delete another code.
Enter-Enter returns you to the menu screen.
6. Defaults, press 6. “ENTER to set defaults” is displayed. Once you press ENTER, then “Setting
defaults…” is displayed and all the units setting are set back to factory defaults. “Defaults set” is
displayed.
Enter-Enter returns you to the menu screen.
7. Select MBM Display, press 7. The following will be displayed:
“Press 1 or 2 to configure MBM display”
“1. Display BABY”
“2. Display PEDS”
“CURRENT: BABY”
BABY is the default. Press 2, “PEDS will then be the setting displayed.
Enter-Enter returns you to the menu screen.