VHF WIRELESS Receiver VHF-02 FCC ID:2AE6GVHF-02 USER’S MANUAL PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION
RECEIVER SPECIFICATIONS Parts Description Receiver Frequency Range: Frequency Stability: Sensitivity: Frequency Response: Audio Output Level: S/N: Distortion: Power Supply: Current Consumption: 177.6MHz 186.6MHz or 198.6MHz 10PPM -92dBm 80Hz~12KHz 150mV(RMS) >75dB <1% DC 9V 200mA 150mA 204.6MHz Frequency Range: 177.6MHz 186.6MHz or 198.
HANDHELD MIC BELT PACK TRANSMITTER Parts Description 1. Grille(Capsule inside) 2. Power/low battery Indicator 3. Power ON/OFF/MUTE Switch 4. Battery Compartment/Cover Parts Description 1 1 2 3 2 3 1. Power ON/OFF/MUTE Switch 2. Power/low battery Indicator 3. MIC in jack 4. Battery Compartment/Cover 4 4 Operation 1. Open battery cover. Install the provided 2pcs 1.5V AA batteries and then close the cover. Pay attention to the correct polarity. 2.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
