Datasheet

25 26
Model name
Industrial Nano USB USB Drive 2SE USB Drive 2ME
Key Features
1. Only expose 5mm height on the
motherboard when applying in practical
2. Smallest USB Drive for indusreial
application
3.Very low power consumption
1.Metal Housing for ESD proof
2.Golden nger with 30μ for highly reliable
data transfer quality
1..Metal Housing for ESD proof
2.Golden nger with 30μ for highly reliable
data transfer quality
Interface USB 2.0 USB 2.0 USB 2.0
Connector Type A Type A Type A
Flash Type SLC SLC MLC
Capacity 1GB~8GB 512MB~16GB 4GB~32GB
Max. Channel 1 1 1
Sequential R/W (MB/sec, max.) 19/17 28/24 26/10
Max. Power consumption 0.45W (5V x 90mA) 0.85 W (5V X 170mA) 0.85 W (5V X 170mA)
Dimension (WxLxH/mm) 15.4 x 19.4 x 6.9 16.58 x 45.88 x 7.48 16.58 x 45.88 x 7.48
Environment Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55°C ~ +95°C MTBF: >3 million hours
Standard temp. OP(0°C~+70°C) DEUN-XXXS23AC*** DEUA1-XXXI72AC*** DEUA1-XXXI72AC***
Extended temp. OP(-20°C~+85°C) N N DEUA1-XXXI72AE***
Wide temp. OP(-40°C~+85°C) DEUN-XXXS23AW*** DEUA1-XXXI72AW*** N
Note
xxx = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 )
***= ash conguration (internal control code)
Model name
USB EDC
Horizontal 2SE
USB EDC
Horizontal 2ME
USB EDC Vertical 2SE USB EDC Vertical 2ME
Key Features
1.Support mounting hole
2.Two kind of connector options
1.Support mounting hole
2.Two kind of connector options
1.Very low prole
2.Low power consumption
1.Very low prole
2.Low power consumption
Interface USB 2.0 USB 2.0 USB 2.0 USB 2.0
Connector
Standard, 10pin, 2.54mm
Low prole, 10pin, 2.00mm
Standard, 10pin, 2.54mm
Low prole, 10pin, 2.00mm
Standard, 10pin, 2.54mm Standard, 10pin, 2.54mm
Flash Type SLC MLC SLC MLC
Capacity 512MB~32GB 4GB~64GB 512MB~16GB 4GB~32GB
Max. Channel 1 1 1 1
Sequential R/W (MB/sec, max.) 28/24 26 /10 28/24 26/10
Max. Power consumption 0.85 W (5V X 170mA) 0.85 W (5V X 170mA) 0.85 W (5V X 170mA) 0.85 W (5V X 170mA)
Dimension (WxLxH/mm)
26.6x36.9x9.6(Pin Pitch2.54)
26.6x36.9x6.6(Pin Pitch2.00)
26.6x36.9x9.6(Pin Pitch2.54)
26.6x36.9x6.6(Pin Pitch2.00)
15.2 x 34.1 x 6.4 15.2 x 34.1 x 6.4
Environment Vibration: 20G@7~2000Hz Shock: 1500G@0.5ms Storage Temperature: -55°C ~ +95°C MTBF: >3 million hours
Standard temp. OP(0°C~+70°C)
DEUH1-XXXI72AC***
DEUH2-XXXI72AC***
DEUH1-XXXI72AC***
DEUH2-XXXI72AC***
DEUV1-XXXI72AC*** DEUV1-XXXI72AC***
Extended temp. OP(-20°C~+85°C) N
DEUH1-XXXI72AE***
DEUH2-XXXI72AE***
N DEUV1-XXXI72AE***
Wide temp. OP(-40°C~+85°C)
DEUH1-XXXI72AW***
DEUH2-XXXI72AW***
N DEUV1-XXXI72AW*** N
Note
xxx = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 )
***= ash conguration (internal control code)
USB
The Innodisk industrial-grade USB series is built as SLC NAND flash and features an attractive small form factor. It provides high-
capacity flash memory storage while delivering faster data transmission with high reliability. It also complies with the high-speed
USB 2.0 interface and is backward compatible with USB 1.1. The Innodisk USB series has a variety of special features, from plastic and
metal housing to secure mounting holes to EDC choices.
Moedel name
nanoSSD 3SE nanoSSD 3ME
Key Features
1.Using BGA packag
e to make controller and ash as single chip
2.Adopt SATA III interface,well Compatibility
3.Complaint with JEDEC MO-276 SPEC, Footprint 11 (n=156)
Interface
SATA III 6.0Gb/s
Flash Type SLC MLC
Capacity 2~16GB 4~32GB
Max. Channel 4 4
Sequential R/W (MB/sec, max.) 480/175 480/90
Max. Power consumption 0.99W (300mA x3.3v) 0.99W (300mA x3.3v)
Thermal Sensor Y Y
External DRAM Buer Optional Optional
iCell Optional Optional
TRIM Y Y
ATA Security Y Y
S.M.A.R.T Y Y
Dimension (WxLxH/mm) 16.0x20.0x2.0 16.0x20.0x2.0
Environment Shock: 1500G@0.5ms Storage Temperature: -55°C ~ +95°C MTBF: >3 million hours
Standard temp. OP (0°C~+70°C)
DENSD-XXXD67AC*** DENSD-XXXD67AC***
Wide temp. OP (-40°C~+85°C)
DENSD-XXXD67AW*** DENSD-XXXD67AW***
Note
xxx = density (02GB=02G, 04GB=04G, 08GB=08G, 16GB=16G, 32GB=32G, 64GB=64G, 128GB=A28, 256GB=B56, 512GB=C12 )
***= ash conguration (internal control code)
nanoSSD
The Innodisk nanoSSD is an integrated SATA storage device. It combines Innodisk ID167 NAND ash controller and latest NAND ash in
a JEDEC MO-276(SATA μSSD) form factor with one single ball grid array (BGA) package, which makes nanoSSD within a tiny dimension,
and very easy to design in. The Innodisk nanoSSD , supporting SATA III 6.0Gbp/s , oers excellent high data transfer rates, along with
lower power consumption. It is an ideal solution for any kind of miniaturization applications.
Benets of nanoSSD
Features
• Chip type, easy to design in without mechanical interference
• SATA interface, highly compatible with x86 system
• Excellent data transfer rates
• Fully compliant with industrial standard
• Suitable for ultra-thin or compact system
• Integrated NAND Flash controller with Flash in a single chip
• Compliant with JEDEC MO-276 (SATA μSSD) specication
• Adopted SATA III interface with BGA package
• Extendable DRAM design
• Zero peripheral circuit
The Innodisk nanoSSD SATA Eye Pattern
The Innodisk nanoSSD mechanical drawing
Real specication is based on ocially launched datasheet.