User's Manual

iCOM_WM05_AN Module EVB_QSG
REV 0.1 8/14/2015
4. Once the device is connected, the GUI would show ‘Chip ID’, ‘ROM Ver’, ‘FW Ver’ and
‘MAC Address’
5. For RX measurements go to ‘RX’ tab of the Radio Tool GUI. Select the channel intended
and set the duration (example 5secs). Click ‘Start RX Testing’ and after 5 secs, the statistics
will appear in the GUI.

6. Example: With 6OFDM packets at -82dBm (when the sensitivity is -89dBm) at channel
2442M, when 1000 packets are received, the statistics shown on the GUI would be as shown
below.