User's Manual

iCOM_WM05_AN Module EVB_QSG
REV 0.1 8/14/2015
4. Select the correct COM port. For correct COM port please see the next section, ‘Radio tool
(to control the device)’.
5. Click on /sys/mcuimg.bin and browse for required binary file
For example, flashing the launchpad with the ‘Radio Tool Application’, select the following binary
available in the path shown below:
C:\ti\CC3XXXRadioTool-0.5\CC32xxBoardApplication_Binary\RadioTool_V1p1_PG1p32.bin
Check ‘Erase’ and ‘Update’.