User's Manual

SN10-12
7/12/2017
REV 0.5
InnoComm Mobile Technology Confidential
11
/
14
5.5 Antenna design declaration:
To compliance FCC KDB 996369 D01 v02 cause II. This module can only be used with a host
antenna circuit trace layout design in strict compliance with the InnoComm instructions provided.
The SN10-12 module use trace antenna in fixture board and compliance 47 CFR FCC Part 15
Subpart C (Section 15.247). For proper integration our modules in end products, we shall provided
detailed and comprehensive instructions. Integrator, or end-user who use new antenna design
will need to apply another FCCID and compliance FCC requirement.,
Antenna design Notice:
Follow notice in section 5.3.2 and 5.3.3., the trace Impedance of the antenna port (Pin 31) is 50 Ω.