User's Manual
Table Of Contents
- Cisco Aironet 1200 Series Access Point Hardware Installation Guide
- Contents
- Preface
- Overview
- Installing the Access Point
- Configuring the Access Point for the First Time
- Using the Web-Browser Interface
- Using the Command-Line Interface
- Mounting Instructions
- 2.4-GHz Radio Upgrade
- 5-GHz Radio Module Upgrade
- Troubleshooting
- Translated Safety Warnings
- Declarations of Conformity and Regulatory Information
- Access Point Specifications
- Channels and Antenna Settings
- Console Cable Pinouts
- Glossary
- Index
First Draft - CISCO CONFIDENTIAL
D-5
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-4310-02
Appendix D Channels and Antenna Settings
Maximum Power Levels and Antenna Gains
Maximum Power Levels and Antenna Gains
IEEE 802.11b (2.4-GHz Band)
An improper combination of power level and antenna gain can result in equivalent isotropic radiated
power (EIRP) above the amount allowed per regulatory domain. Table D-4 indicates the maximum
power levels and antenna gains allowed for each IEEE 802.11b regulatory domain.
Table D-4 Maximum Power Levels Per Antenna Gain for IEEE 802.11b
Regulatory Domain Antenna Gain (dBi) Maximum Power Level (mW)
Americas (-A)
(4 watts EIRP maximum)
2.2 100
5.2 100
6 100
8.5 100
12 100
13.5 100
EMEA (-E)
(100 mW EIRP maximum)
2.2 50
5.2 30
630
8.5 5
12 5
13.5 5
Japan (-J)
(10 mW/MHz EIRP maximum)
2.2 30
5.2 30
6 30
8.5 n/a
12 n/a
13.5 5
Israel (-I)
(100 mW EIRP maximum)
2.2 50
5.2 30
630
8.5 5
12 5
13.5 5