User's Manual

First Draft - CISCO CONFIDENTIAL
C-3
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-4310-02
Appendix C Access Point Specifications
Antenna A diversity system with two reverse-TNC
connectors (Cisco antennas are sold
separately).
A diversity system consisting of two integrated
omnidirectional and two integrated directional
antennas.
Compliance The 1200 series access point complies with UL 2043 for products installed in a building’s
environmental air handling spaces, such as above suspended ceilings.
Caution The 1200 series power injectors are not tested to UL 2043 and should not be placed in a
building’s environmental air space, such as above suspended ceilings.
Note If you plan to mount the access point in environmental air space using a 5-GHz radio, Cisco
recommends that you mount the access point horizontally with its antennas pointing down.
Doing so results in the access point complying with regulatory requirements for
environmental air space with the 5-GHz radio installed.
Safety Designed to meet:
• UL 1950 Third Edition
• CSA 22.2 No. 950-95
• IEC 60950 Second Edition, including
Amendments 1-4 with all deviations
• EN 60950 Second Edition, including
Amendments 1-4
Designed to meet:
• UL 1950 Third Edition
• CSA 22.2 No. 950-95
• IEC 60950 Second Edition, including
Amendments 1-4 with all deviations
• EN 60950 Second Edition, including
Amendments 1-4
Radio Approvals 802.11b-compliant radio:
FCC Part 15.247
Canada RSS-210
Japan ARIB-STD-33B
EN 300.328
802.11g-compliant radio:
FCC Parts 15.247, 15.205, 15.209
Canada RSS-210
Japan ARIB-STD-33B
Japan ARIB-STD-66
Europe EN-300.328
FCC Part 15.407
Canada RSS-210
Japan ARIB STD-T71
EN 301.893
Table C-1 Access Point Specifications (continued)
Category
Access Point with 2.4-GHz Radio
(802.11b-compliant or 802.11g-compliant) Access Point with 5-GHz Radio Module