User's Manual

First Draft - CISCO CONFIDENTIAL
C-2
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-4310-02
Appendix C Access Point Specifications
Power Output With 802.11b-compliant radio:
100, 50, 30, 20, 5, or 1 mW
With 802.11g-compliant radio:
100, 50, 30, 20, 5, or 1 mW
(at 1, 2, 5.5, and 11 Mbps)
30, 20, 10, 5, or 1 mW
(at 6, 9, 12, 18, 24, 48, and 54 Mbps)
(Depending on the regulatory domain in
which the access point is installed)
40 mW (16 dBm)
20 mW (13 dBm)
10 mW (10 dBm)
5 mW (7 dBm)
Note These values are based on the FCC peak
measurement method as defined in
FCC 15.407 (A)(4)
Frequency 2.400 to 2.497 GHz
(Depending on the regulatory domain in
which the access point is installed)
UNII 1—5.15 to 5.25 GHz
UNII 2—5.25 to 5.35 GHz
(Depending on the regulatory domain in which the
access point is installed)
Range Indoor:
802.11b-compliant radio:
150 ft at 11 Mbps
350 ft at 1 Mbps
802.11g-compliant radio:
TBD at 36 Mbps
TBD at 54 Mbps
Outdoor:
802.11b-compliant radio:
800 ft at 11 Mbps
2000 ft at 1 Mbps
802.11g-compliant radio:
TBD at 36 Mbps
TBD at 54 Mbps
Indoor:
170 ft at 6 Mbps
130 ft at 18 Mbps
60 ft at 54 Mbps
Outdoor:
1000 ft at 6 Mbps
100 ft at 54 Mbps
Modulation 802.11b-compliant radio:
Direct Sequence Spread Spectrum
(DSSS)
802.11b-compliant radio:
Orthogonal Frequency Division
Multiplex (OFDM)
Orthogonal Frequency Division Multiplex (OFDM)
Data rates 802.11b-compliant radio:
1, 2, 5.5, and 11 Mbps
802.11g-compliant radio:
1, 2, 5.5, and 11 Mbps
6, 9, 12, 18, 24, 36, 48, and 54 Mbps
6, 9, 12, 18, 24, 36, 48, and 54 Mbps
Table C-1 Access Point Specifications (continued)
Category
Access Point with 2.4-GHz Radio
(802.11b-compliant or 802.11g-compliant) Access Point with 5-GHz Radio Module