User's Manual

Appendix C Declarations of Conformity and Regulatory Information
Safety Information for the AIR-MPI352
C-4
Cisco Aironet AIR-MPI352
OL-XXXX-0X
The device is certified to the requirements of RSS-210 for 2.4-GHz spread
spectrum devices. The use of this device in a system operating either partially or
completely outdoors may require the user to obtain a license for the system
according to the Canadian regulations. For further information, contact your local
Industry Canada office.
Safety Information for the AIR-MPI352
The Federal Communications Commission (FCC) with its action in ET Docket
96-8 has adopted a safety standard for human exposure to RF electromagnetic
energy emitted by FCC certified equipment. Cisco Aironet Mini PCI product
meets the uncontrolled environmental limits found in OET-65 and ANSI C95.1,
1991. Proper operation of this radio according to the instructions found in this
manual and the hardware and software guides on the Cisco Aironet Series
Wireless LAN Adapters CD will result in user exposure that is substantially below
the FCC recommended limits.
• Do not touch or move the antenna(s) while the unit is transmitting or
receiving.
• Do not hold any component containing a radio such that the antenna is very
close to or touching any exposed parts of the body, especially the face or eyes,
while transmitting.
• Do not operate the radio or attempt to transmit data unless the antenna is
connected; otherwise, the radio may be damaged.
• Use in specific environments:
– Do not operate a portable transmitter near unshielded blasting caps or in
an explosive environment unless it is a type especially qualified for such
use.
– The use of wireless devices in hazardous locations is limited to the
constraints posed by the safety directors of such environments.
– The use of wireless devices on airplanes is governed by the Federal
Aviation Administration (FAA).
– The use of wireless devices in hospitals is restricted to the limits set forth
by each hospital.