Home Security System User Manual

Concept 4000 / Insight - Integrated Security Management
10
Concept Hardware / Insight Software
Insight Software
Insight Professional is a “best in class” system management
software solution providing customers with user friendly
control and management of multiple Concept 4000
hardware platforms.
The core package provides site management, panel
programming, event review, floor plan functionality, basic
reporting, operator and user administration.
Optional Modules
• DVR Integration Module
• Advanced Reporting Module
• Photo-ID Module: Adds card design/print support
• Card Enrolment Station (hardware)
• COM and PMS Interfaces
• Insight Communicator
994402 Insight Professional
994405 Insight Advanced Reporting Licence
994410 Insight DVR Integration Module (allows
connection of up to 30 cameras)
994411 Insight Extra DVR Licence (allows
connection of an additional 10 cameras
for each additional licence with no limit
on total number of cameras)
994406 Insight PhotoID Licence
994408 Insight COM Interface Module (Read Only)
994417 Insight COM Interface Module
(Write & Control)
994409 Dynamic User Import Module
994412 Insight Card Pool Module
994416 Insight Communicator
994403 Insight Multi Panel Licences
994404 Insight Multi Client Licences
994420 Insight Remote Client Licence
994421 Insight Remote Installer Licence*
994500BlankAU Insight Card Enrolment Station –
No reader fitted
994500WiegAU Insight Card Enrolment Station –
IR Dual-format reader fitted
*Requires Insight Installer Dongle. Contact Inner Range for more information.
Control Module & Options
Concept 4000 delivers unrivalled security power with its
integrated combination of intruder alarm, access control,
building automation and security communications features.
The Control Module is the foundation of all Concept 4000
hardware systems. The flexible, modular design of the
Concept 4000 architecture allows the expansion of a single
Control Module to a network of hundreds of modules,
50,000 users, 2000 inputs, thousands of outputs, 250 areas
and 250 doors.
The Control Module comes with 16 zone inputs, 2 outputs,
an on board switch mode power supply, LAN port, modem,
serial port, siren and relay outputs.
995001AU Concept 4000 (32K)
with plugpack in Med LPE
995002AU Concept 4000 (128K)
with plugpack in Med LPE
995001AUPS Concept 4000 (32K)
with transformer in Med LPE
995002AUPS Concept 4000 (128K)
with transformer in Med LPE
995001AUPCB&K Concept 4000 (32K) short form kit
995002AUPCB&K Concept 4000 (128K) short form kit
Control Module Memory Options
Installer selectable memory configurations allow
optimisation to meet differing project requirements. Further
flexibility is afforded with the addition of memory upgrades
and special features chips. Custom Configurations can also
be purchased to cater for unique site needs.
995015 128K Memory Upgrade Chip
995016 512K Memory Upgrade Chip
995017 32K Memory Replacement chips
995015P8 128K Memory Expansion +
Programmable Site Code Support
995016P4 512K Memory Expansion + High Level
Lift Interface*
993401 Custom Memory Configuration*
995101AUFULL Firmware Upgrade
*Please consult Inner Range for more details prior to purchasing
items marked with an asterisk.
Control Module Hardware Add-ons
Up to 8 open collector or relay outputs can be added
directly to the Control Module with expansion boards.
Communications flexibility is enhanced with plug-on UART
boards. Serial/Ethernet and serial only versions are available.
The Control Module supports up to four simultaneous
communications tasks, allowing the hardware platform to
be interacting with an Operator using the Insight software
at the same time as communicating with multiple building
automation systems.
995055 8 Auxiliary Output Expander Board
995084 8 Relay Expander Board
– Control Module Version
995065 1 Port Serial UART
995066 2 Port Serial UART
995068 4 Port Serial UART
995090 Ethernet UART with 1 Serial Port
995091 Multiport Ethernet UART
(1 Ethernet, 3 Serial Port)