Operation Manual

83
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
HomeZone selection.
The display will show the name and current status
of the first HomeZone. (V3 or later only)
NOTE: Only available if the HomeZones option is
used in your system.
The <UP> and <DOWN> Arrows will search
through the named HomeZones alphabetically,
OR
Press the <DIGIT> key that represents the first
letter of the name. (You may have to press the key
2 or 3 times to obtain the required letter.)
If the name you want is not displayed because of
other names starting with the same letter, use the
<DOWN> Arrow key to locate the name, then
press the <OK> key to proceed.
ISOLATE / DE-ISOLATE THE INPUT.
The display will now show the name and current
status of the Zone/Input .
<OFF> key to Isolate the Zone displayed. Any
Zones isolated in this way are automatically
De-isolated when the Area is next turned OFF.
<ON> key to De-isolate (or “Enable”) the Zone.
<RIGHT> arrow key to “Sticky Isolate” the Zone.
The Zone will remain isolated unless
De-isolated from the LCD Terminal via this
Menu option.
A brief message will appear on the display to
confirm that the operation was successful.
When complete press the <OK> key to return to
the “Zone to Isolate” display.


















OR
then if required
then
or or
ISOLATE