Operation Manual

63
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000.CONCEPT 4000.
CONCEPT 4000. User Manual.
    
    
  









  
  
 
  
  
 






The ARM2 options allow the ARM/OFF 2 buttons
on the REM3 Fob to be programmed.
The options are the same as the ARM1 options
above.
USER QUALIFICATIONS
(V7.8 or later only)
This feature supports OH&S requirements where
Users are required to have a current industry/
safety qualification, or similar, in order to gain
access to a restricted site, area, etc.
This feature is only intended to be used with the
Insight User Qualifications Module and must be
enabled by the Installer. Once enabled, settings
would be programmed from Insight and not via
an LCD Terminal.
This display allows the qualilfications for this
User to be viewed and edited. Do not edit this
screen without consulting the Installer.
NOTE: This option is only available to Users with
PIN codes and the Extra Door/Extra Door List
options available.
  
  
 








