Use and Care Guide

ibwellness.com
Chair Manual
12
11
Operation Guide
DISPLAY DIAGRAM
1. Power is on
2. Massage chair is scanning the users back contour
3. Scanning is complete and the massage is about to begin
4. Pause button has been pressed and the chair is temporarily stopped
5. Reclining position adjustment buttons are pressed and the backrest and/or
legrest are moving
6. Which massage technique is activated
7. Direction of massage rollers
8. Speed level
9. Air intensity level
10. Massage roller width
11. Heating function is on
12. Location of massage rollers and active air bags
13. Time remaining in current massage program
14. An Auto Course is activated
1 2 3 4
10 9 8
5
6
7
12
Operation Guide
FUNCTION DESCRIPTION OF CONTROLLER BUTTONS
Power Button
Press the power button to turn ON the massage chair. Press again to
turn OFF. Massage chair will then return to default upright position.
Position Adjustment Buttons
Press this button to move the back and leg position. Press once for
Zero G1, twice for Zero G2, three times for Zero G3 and four times to
return to the original position.
Press and hold this button to adjust the footrest.
Press and hold this button to adjust position of
the backrest or legrest.
Note: The position adjustment buttons are disabled when the chair is in
STRETCH mode.
Heat – Press to turn heating function on
and o.
Speed – Press to cycle through three levels
of speed: Tapping & Kneading, Dual Action
& Shiatsu.
Intensity – Press to cycle through ve levels
of intensity.
Time – Press to increase the massage time in
increments of 5 minutes. The default working
time is 15 minutes. The maximum working time
is 30 minutes.
Zero G1
"
Zero G2
"
Zero G3
"
Original Position
14
13
12
11