Use and Care Guide

ibwellness.com
Chair Manual
8
7
Chair Installation
1. Removing the chair and parts from the package
Lift Carton Upwards
Lift Carton Upwards
a. Lift and remove main outer carton.
b. Remove cardboard and foam on both sides of the massage chair.
c. Remove accessory box (includes: instructions, power cord etc.).
2. Finding a location for the chair
3. Moving the massage chair
Allow sucient space around the chair
for recline purposes. (6in distance for the
back side and 20in in front of
the footrest.)
* To avoid damage to the oor and reduce
the noise, put an area rug under the
massage chair.
* Please do not put it on wet or
uneven oor.
* To avoid signal interference, please place it 4
feet away from AV, TV, and radio.
Push backrest downwards to tilt the chair at
a 45’ angle. Slowly maneuver the chair to a
desired location. Lower the chair slowly and
smoothly until it is fully at on the ground.
* Do not move massage chair when in use.
* Moving the massage chair may cause damage to
oors. Floor protection is recommended
(e.g. rugs, carpet).
* Do not drop or suddenly let go of the chair when
moving as it may damage the chair.
* It is recommended to work with at least
two people.
4. Adjust the position of the headrest.
– Adjust the under-part of the
headrest and align it with the
position of the ear.
1. Make sure that the product is in
good condition.
– Conrm that the headrest, backrest
and power plug are not damaged.
– Make sure the footrest is in its right
position (as shown in the diagram to
the left).
2. Check the surrounding area to make
sure that it is clear of any obstruction
for incline and recline of the chair.
– Make sure there are at least 6in back
and 20in in front of the chair.
3. Connect the chair to a power source.
– Plug the chair in.
– Turn the power switch to “on.”
Before Use
6in 20in