Use and Care Guide

ibwellness.com
Chair Manual
4
3
Safety Instructions
CONSERVEZ CE MODE D’ EMPLOI
INSTRUCTIONS VISANT LA MISE À LA TERRE
Cet appareil doit être mis à la terre. En cas de défaillance ou de panne, la mise á
la terre fournit au courant un chamin de moindre résistance qui réduit le risque
de choc électrique. Cet appareil est pourvu d’un cordon muni d’un conducteur
de terre et d-une che avec broche de terre. La che doit être branchée dans
une prise appropriée correctement installée et mise à la terre conformément aux
réglements et ordonnances municipaux.
AVERTISSEMENT – Un conducteur de terre mal raccordé peut entraîner un
risque de choc électrique. Consulter un électricien ou un technicien d’entretien
qualié si vous n’êtes pas certain que la prise est correctement mise à la terre.
Ne pas modier la che fournie avec l’appareil – si elle ne peut être insérée
dans la prise, faire installer une prise adéquate par un électricien qualié.
Cet appareil est destiné à un circuit de 120 V et est muni d’une che de mise à
la terre semblable à celle illustrée par le croquis A de la gure 20. S’assurer que
l’appareil est branché à une prise de courant ayant la même conguration que la
che. Aucun adaptateur ne devrait être utilisé avec cet appareil.
Figure 86. 1
Grounding Methods
Safety Instructions
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to reduce the
risk of electric shock. This product is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug must be pugged into an
appropriate outlet that is properly installed and grounded in accordance with all
local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor
can result in a risk of electric shock. Check with a qualied electrician
or serviceman if you are in doubt as to whether the product is properly
gounded. Do not modify the plug provided with the product - if it will not t
the outlet, have a proper outlet installed by a qualied electrician.
This product is for use on a nominal 120-V circuit, and has a grounding plug
that looks like the plug illustrated in sketch A in Figure 86.1. A temporary
adapter that looks like the adapter illustrated in sketches B and C may be
used to connect this plug to a 2-pole receptacle as shown in sketch B if a
properly grounded outlet is not available. The temporary adapter should be
used only until a properly grounded outlet (sketch A) can be installed by a
qualied electrician. The green colored rigid ear, lug, or the like extending from
the adapter must be connected to a permanent ground such as a properly
grounded outlet box cover. Whenever the adapter is used, it must be held in
place by a metal screw.
Figure 86. 1
Grounding Methods
PRECAUCIAONES IMPORTANTES