by A Division of Johnson Health Tech, NA. 1600 Landmark Drive, Cottage Grove, WI 53527 877.217.2862 info@ib-wellness.com ib-wellness.com 1 Chair Manual inner balance User Manual Please read this user manual thoroughly prior to operating the massage chair. Please keep this manual for future reference. ibwellness.
Contents Congratulations on purchasing a Jin massage chair. Please read and follow all safety and operating instructions listed in this user manual prior to use. Basic precautions should always be used when operating an electrical appliance. Safety Instructions..........................................3-6 Product Specifications.......................................7 Hardware Pack Contents..................................7 Product Components....................................8-9 Chair Installation.......
Safety Instructions Safety Instructions SAVE THESE INSTRUCTIONS CONSERVEZ CE MODE D’ EMPLOI GROUNDING INSTRUCTIONS INSTRUCTIONS VISANT LA MISE À LA TERRE This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipmentgrounding conductor and a grounding plug.
IMPORTANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following: Lors de l’utilisation d’un appareil électrique, veiller à toujours respecter des précautions élémentaires, notamment ce qui suit: Read all instructions before using (this appliance). Lire toutes les instructions avant d’utiliser (cet appareil).
Product Specifications Product Components MAIN BODY DIAGRAM (FRONT) Description Specifications Product Name Massage Chair Model No.
Product Components MAIN BODY DIAGRAM (REAR) Chair Installation 1. Removing the chair and parts from the package Remove the carton. Foam Left and right shoulder are put in these two positions separately a. Lift and remove main outer carton. b. Remove cardboard and foam on both sides of the massage chair. c. Remove accessory box (includes: instructions, power cord etc.). 2.
Chair Installation Chair Installation 3. Installing the shoulder airbags 5. Finding a location for the chair Locating pin hole Locating pin Cross screw 3.5 in (1) (2) Cross screwdriver (3) e Ke 1. P lace the chair in the desired location and not in direct sunlight. 2. M ake sure there is at least 3.5 in behind and in front of the chair. Press cti a his pt Press 3.5 in on t jus (5) Shoulder position adjustment (6) n ow Finished Lift rd o up Shoulder airbag tube ad Lift (4) a.
Before Use Remote Controller 1. M ake sure that the product is in good condition. – Confirm that the headrest, backrest and power plug are not damaged. – Make sure the footrest is in its right position (as shown in the diagram to the left). Display 2. C heck the surrounding area to make sure it’s clear of anything obstructing the chairs incline/recline. – Make sure there are at least 3.5 inches in front and back of chair. Relief PRE-PROGRAMMED AUTO COURSES (Bright Green Buttons) 3.
Operation Guide Operation Guide FUNCTION DESCRIPTION OF CONTROLLER BUTTONS Start or Stop massage chair - Press this button to turn the massage chair ON. Now you can select an auto course or manual massage function. - Press this button again to turn massage chair OFF. Massage function will stop and the massage chair will come back to the original position. When the chair returns to the original position the chair will completely shut off and all buttons will be inactive.
Operation Guide Operation Guide DISPLAY DIAGRAM AFTER USE 1 2 3 4 1. A fter the massage program is completed, return chair to upright position by pressing the On/Off button. Before pressing: 5 7 8 9 - Make sure surrounding area is clear. - Keep arms and legs away from gaps between the armrest, legrest, and footrest, to prevent possible injury. 12 11 10 1. Power is on. 2. M assage chair is scanning the users back contour to provide a massage experience customized for the user. 3.
Maintenance Trouble Shooting - Turn off and unplug the chair before cleaning. You may experience the following noises or feeling when in massage, as being due to the mechanical design, they will not have any effect on the operation of the unit and the product life. • A “clatter” noise occurs when the knead balls go up and down. - Use a dry, neutral colored cloth or soft bristled brush to lightly wipe the chair. - Do not use water or any other liquids to clean the chair.
Trouble Shooting PROBLEMS TROUBLESHOOTING Check whether the switch has been turned on. Turn on the switch. Check whether the button on the remote controller has been pressed. Press the button on the remote controller. No massage function has been selected. Select a massage function. Check whether there is poor connection between the power plug and the receptacle. Ensure good connection between the power plug and the receptacle. Different height of the left and right knead balls.
