User Manual

K 5 9 5 D a t a s h e e t P a g e | 5
PIR Specification
Parameter K595
No. of Fresnel beams 27
No. of curtain beams 9 + 5
Max. coverage See Figure 2
Sensitivity 0.5m–12m (1.64-40 ft.)
RF Specification
Parameter K595
RF Data Rate 250kbps
Antenna Type SMT
Indoor Range 70ft
Transmit Power 1mW (+0dBm)
Receive Sensitivity -94.6dBm
Frequency Band 2.4Ghz
Encryption AES-128
Protocol 802.15.4
Frequency Channels 11-26
Technical Specification
Parameter K595
Input voltage 4xAA Batteries
Battery Life 2.2 years
Operating temperature 0 °C to 60 °C (32 °F to 140 °F)
Storage temperature -20 °C to 60 °C (-4 °F to 140 °F)
Headers and Connectors
Header Connector
H1 Digital Input
H2 ICP
H3 Battery Input
Safety/Regulatory
Parameter Condition Status
FCC Part 15b
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
Deleted:
H2