User Manual

60 / 64
 Check the SmartKey to make sure the INMOTION SCV is not locked.
 If the INMOTION SCV can still not power on, remove the Battery Pack and then reinsert it.
7.3. The INMOTION SCV Cannot Enter Balance Mode
Recommended Action:
 Confirm the INMOTION SCV is powered on.
 Make sure the Turning Shaft is centered and the Footboard Mat is level.
 Confirm there is no weight on the Footboard Mat.
 Tap the left side of the Footboard Mat with your foot without stepping on, and then tap the right side with your
other foot.
 If the INMOTION SCV still cannot enter Balance Mode, check to see if there is an error icon on your SmartKey.
 If the INMOTION SCV still cannot power on, remove the Battery Pack and then reinsert it.
7.4. The INMOTION SCV Is Shaking
Recommended Action:
 Check the joints between the Handlebar and the Turning Shaft. If they are loose, tighten them.
 Check the joints between the Handlebar and the Quick Release Lock. If they are loose, tighten them.
 Check the joints between the Tires and the Wheels. If they are loose, tighten them.
7.5. The Turning Shaft Slips or Is Off-Centered
Recommended Action: