User Manual

39 / 64
3.6. Self-check Mode
Self-check Mode allows you to run a thorough examination of your INMOTION SCV to see if any parameters have been
shifted with by aging and environment. The INMOTION SCV will run tests under Self-check Mode and store the resulting data.
Please refer to the smartphone app chapter in this manual for more information on self-check mode. The following chart shows
which items are detected in Self-check Mode:
Item
Description
Steer Balance
Run the Steer Balance calibration if you detect that your INMOTION SCV leans in an incorrect
direction when it stands in balance.
Footboard Mat Sensor
Calibrate the Footboard Mat sensors to level up the sensitivity.
RTC Time
Calibrate internal timer（by GPRS and GPS info.）
Encoder Absolute Position
Calibrate absolute position of the encoder, lift efficiency of SCV
 Activate Self-check Mode in an open area.
 Park the INMOTION SCV on the ground and keep one meter distance from other objects.
 Make sure the Handlebar is vertical. Do not pull the Turning Shaft or hold the Handlebar.
 Do not place anything on the Footboard Mat, including your feet.
 Doing so could interfere with the result of Self-check, causing injury or damage.