User Manual

16 / 64
 Please confirm the Turning Shaft is installed properly. Try lifting the Turning Shaft with both hands to check if it is
loose. If it is loose, tighten the Screw.
 If you need to remove the Turning Shaft, hold it tightly with one hand, unlock the Quick Release Lock, slightly shake it
and then pull it out.
2.6. Control Shortcuts
The control shortcut functions refer to the easy movements to turn
on/off, and mode switch etc.. The control shortcuts include:
Power on: Lay the SCV horizontally, namely keep the Footboard
parallel with the horizontal inclination and INMOTION SCV will be
activated automatically. (Shown in Picture 1);
Power off: When stepping off the Footboard, naturally lean
INMOTION SCV backward and keep that status for more than 3 seconds,
INMOTION SCV will power off automatically. If the statue has been kept
less than 3 s, INMOTION SCV will stay power on (shown in Picture 2);
Auxiliary Mode: When INMOTION SCV is on, turn left or right to
the full lock, SCV will enter Auxiliary Mode automatically;
Cancel Auxiliary Mode: When you step on Footboard by one foot,
Auxiliary Mode will be off。
 In Auxiliary Mode, as long as both of your feet are on the Footboard, it will stay in Auxiliary Mode till you step
off;
 When INMOTION SCV is turned on by remote control or APP and not turned off by auto-off shortcut, it can only