Content Content ........................................................................................................................................................................................... 1 1. Introduction.......................................................................................................................................................................... 6 1.1. About This Manual .............................................................................................
.7.2 2.8. Sound Prompt ..................................................................................................................................................... 19 Working Mode ............................................................................................................................................................. 20 2.7.3 Introduction ...........................................................................................................................................
.1.2. 30 3.1.3. Stepping On ........................................................................................................................................................ 31 3.1.4. Moving Forward and Backward ......................................................................................................................... 32 3.1.5. Stopping ................................................................................................................................................
. Using the Battery Pack....................................................................................................................................................... 45 4.1. Parameters for the Battery Pack ................................................................................................................................... 45 4.2. Battery Safety.........................................................................................................................................
7.3. The INMOTION SCV Cannot Enter Balance Mode .................................................................................................... 60 7.4. The INMOTION SCV Is Shaking ................................................................................................................................ 60 7.5. The Turning Shaft Slips or Is Off-Centered ................................................................................................................. 60 7.6.
1. Introduction 1.1. About This Manual This User Manual is intended to help you set up and use your INMOTION SCV. You need to read this Manual carefully, watch the Safety Videos and make sure that you follow the safety instructions when using your INMOTION SCV. It is important that you adhere to all safety Warnings and Cautions that appear throughout this User Manual. This User Manual is suitable for all INMOTION products. Certain functions are limited to specific models.
hours before the first use. To assemble the INMOTION SCV and charge the Battery Pack for the first time, please refer to Sections 2.5 Assembling the INMOTION SCV and 4.3 Charging the INMNOTION SCV in this Manual. 1.4. Related User Materials INMOTION provides pdf version of the User Manual, Safety Videos, APP and help documents for your convenience. You can download these electronic files as well as the INMOTIONS SCV Smartphone App fromwww.imscv.com. 1.5.
2. General Information 2.1.
2.2. INMOTION SCV Serial Number The serial number is unique to your INMOTION SCV. Please write it down and keep it safe. The serial number is a 16-digit number printed along with the barcode on your INMOTION SCV. The serial number is required for after-sales service, warranty, insurance, or confirmation of loss claims. Locations of the INMOTION SCV Serial Number: 2.3.
/ 64
2.3.1. Parameter Item Value Note Model INMOTION R2 ① Max. Speed 15 Km/h (9 mph)① application. You may get a higher instant speed but Distance per charge 30 Km② will stabilize at the set speed. Max Climbing Angle 15° Machine Weight 17.5Kg following test conditions: 25℃, 70 Kg (77 °F, 155 Load 25~ 100 Kg lbs.) payload and smooth terrain. The cruising Turning Radius 0m distance varies under different riding conditions.
2.4.
2.5. Assembling the INMOTION SCV 2.5.1. Unpacking the box Any missing or visibly damaged parts should be reported to your dealer immediately. 1. INMOTION SCV main body 5.Installation Tool and a spare Screw 2. Handlebar 6. Packing box for Self-positioning 3. Turning Shaft and Screw follower(containing Self-positioning follower and a 4. Charger Adapter Micro USB cable) 7.
2.5.2.
Assembling the INMOTION SCV: 1. Insert the Handlebar into the top of the Turning Shaft (the slimmer part), and tighten the Screw using the Installation Tool. The extra Screw and Installation Tool are included in the box. Please pay attention to the front and back of the Handlebar. 2. Unlock the Quick Release Lock, insert the Turning Shaft into the Pivot Base Assembly until you feel resistance, and lock the Quick Release Lock.
Please confirm the Turning Shaft is installed properly. Try lifting the Turning Shaft with both hands to check if it is loose. If it is loose, tighten the Screw. If you need to remove the Turning Shaft, hold it tightly with one hand, unlock the Quick Release Lock, slightly shake it and then pull it out. 2.6. Control Shortcuts The control shortcut functions refer to the easy movements to turn on/off, and mode switch etc..
be turned off by remote control and APP In power off mode, when you turn the Handlebar to the utmost left and hold it for 3 s, safety alerts will be set off; In power off mode, when you turn the Handlebar to the utmost right and hold it for 3 s, safety alerts will be turned off; 2.7. 2.7.1 INMOTION SCV is turned on by remote control or mobile app, it can only be turned off in the same way; Users can turn on and off control shortcut by the mobile app.
Icons and Descriptions: Icon Description Icon Description Auxiliary Mode icon: Manned Speed Mode icon: Short handlebar manned mode power on Remote Control Mode icon: Error icon: Indicates an INMOTION SCV Lock Mode system failure. Bluetooth icons Red indicates that Wi-Fi is unable to be connected. Blue indicates that the SCV has connected to Wi-Fi. Off indicates that Wi-Fi is functioning well but is not connected.
Battery 5 bars More than 3 bars: Green 2 bars and 3 bars: Yellow 0 bar and 1 bar: Red, the gauge flashes to warn low battery Bar 1, 3 and 5 glittering blue when the INMOTION SCV is Panel icon: in Standby Mode. Under Balance Mode, Auxiliary Mode or Remote Control Mode, the circle will rotate following the sequence (6,1)(2,3)(4,5)(6,1), the faster you ride, the faster the circle rotates, vice versa. Bar 1, 3 and 5 glitter in red when the INMOTION SCV encounters a problem.
2.8. Working Mode 2.7.3 Introduction INMOTION SCV has more than 10 working modes, here we list out important modes. Working Mode Standby Description The INMOTION SCV is in Standby Mode by default. Most of the other modes will be started from Standby Mode. Balance INMOTION SCV has detected a rider and the footboard angle is moderate. Training Mode and Speed Mode can be activated from Balance Mode. Read following sections for more information.
Auxiliary Mode Under Assist Mode, the INMOTION SCV will provide a small amount of power to allow the SCV to be easily dragged. You can choose different reference points when entering Assist Mode. For more information about Assist Mode, please refer to Section 3.4 Assist Mode. Remote Control Remote Control Mode can be started from your Smartphone App. The INMOTION SCV can receive and execute simple orders under Remote Control Mode. Please read Section 3.5 for more information.
2.9. Lights 2.9.1. The Head/Tail Lights The Head Light of the INMOTION SCV is a pair of blue LED lights, and the Tail Light is a pair of red LED lights. They glittering different modes according to your operations, such as power on/off, brake, turn, and error alert. By operating mobile APP, users can control head/tail lights.
Parameter Value Parameter Value Light intensity 110lm Waterproof grade IP55 Color temperature 5700~6300k,close to daylight Charging time 3hours Continuous 2hours Life expectancy of 100,000 hours illumination time lighting bulb 2.10. Pedal Sensor INMOTION SCV is equipped with pedal sensors to detect whether a person riding on a pedal. In principle pedal sensor is similar to scales, which can distinguish one leg, feet, and whether the load.
2.10.3. Self-positioning follower user instructions Use: Self-positioning follower does not have the obstacle avoidance function, acoustic wave propagates in the air, if the surrounding environment is too complex, and that will reduce the sensitivity, so self-positioning follower is more suitable for use in a more open space. Life time: the sustainable use of 10 hours.
R2 will not travel too fast, so users should be careful, not to use walk too fast, in order to avoid the signal loss of self-positioning follower. This feature is only for entertainment, R2 following function does not have the obstacle-avoidance features, users are recommended to use that in the open space, otherwise it may lead to a collision. 2.11.
2.12. USB Charging Port The USB Charging Port is located on the back of the INMOTION SCV body. The Port can be used to charge your mobile devices (including phones, tablets etc.,) as well as the Smart Key. Output voltage of the USB Charging Port is 5 volts and the electrical current is 300 mA. 2.13. Smartphone App* INMOTION App is a specific app for INMOTION users designed by Inmotion Technology Co. Ltd.
to control, socialize, upload articles on experience of INMOTION, participate in INMOTION activities, and purchase INMOTION parts. Download the INMOTION App from our website, Apple App Store for iOS devices, or Google Play for Android devices.(The INMOTION App may not be officially available when you purchase the product, it will come to you region soon).
Read help documents on your App for more information on what the App can do* 3. Riding Your INMOTION SCV 3.1. Riding Guidelines The INMOTION SCV is a high-tech sensor controlled vehicle. If you try to ride the INMOTION SCV without familiarizing yourself with the riding guidelines, you could cause damage to the device, or seriously injure yourself. This section describes how to ride the INMOTION SCV properly. It discusses riding for the first time and helpful hints for all riders. 3.1.1.
Do not select a slippery area for your first ride. Get a helper who is familiar with the INMOTION SCV and who has studied all the instructions and warnings in this manual. Wear a helmet. Move the INMOTION SCV to the center of the riding area. Adjust the Handlebar to suit your height. 3.1.2.
Please don’t step on INMOTION SCV immediately as it has not entered the balance mode. 3.1.3. Stepping On Before you attempt to step on for the first time, have your helper stand facing you in front of the INMOTION SCV, holding the Handlebar securely with both hands. Your helper should be prepared to firmly hold the INMOTION SCV to keep it from moving. Make sure the Footboard Mat is level. Hold the Handlebar with both hands, and as you step up, look straight ahead and not down.
move before you are familiar with it. 3.1.4. Moving Forward and Backward The INMOTION SCV moves forward and backward in response to changes in your position. When standing on the Footboard Mat, to move forward or backward: With your helper available to assist you, slowly lean forward and feel the INMOTION SCV move forward. Then stop leaning forward and feel it slow down and stop. Do this a few times.
3.1.5. Stopping Stop the INMOTION SCV by shifting your weight away from the direction you are moving. To stop the INMOTION SCV: When you are moving forward, gently shift your hips back (as if you are preparing to sit down) to bring the INMOTION SCV to a stop. Once stopped, center your weight over the Footboard Mat to remain stationary. If you continue to lean back, you will move backward. Practice choosing a spot on the ground, and coming to a smooth controlled stop at that spot.
3.1.6. Turning the INMOTION SCV The INMOTION SCV turns in the direction that you lean the Handlebar. You turn the INMOTION SCV by leaning the Handlebar left or right. First, practice turning in place. To turn in place, slowly pivot the Handlebar in the direction that you want to turn. The INMOTION SCV will rotate so that you turn in place. After you are comfortable going forward and backward and turning in place, try slowly riding forward and turning at the same time.
3.1.7. Stepping Off When you are ready to step off the INMOTION SCV for the first time, your helper should hold the Handlebar. To step off the INMOTION SCV: Remain stationary by keeping your weight centered over the Wheels and Footboard Mat and keep the Handlebar vertical. Step off the INMOTION SCV slowly, one foot at a time. After you have stepped off, continue to hold the Handlebar for about a second. You can lean the INMOTION SCV backward and park it when you hear a tone.
3.1.8. Securing Your INMOTION SCV The INMOTION SCV has Lock Mode in case you need to leave your INMOTION SCV unattended. You can lock the Handlebar by control shortcut through your smartphone and put INMOTION SCV. When the INMOTION SCV is in Lock Mode: If anyone tries to move or shake the INMOTION SCV, it will trigger the warning alert and SCV body vibration. The Tires will be locked to make it difficult to move your INMOTION SCV.
INMOTION SCV. Practice at the Training level until you can step on, ride forward and backward, turn, stop, and step off with the same precision and confidence as you walk. 3.3. With practice, you should be able to ride in narrow areas. Make sure you leave enough wheel clearance. Until you can ride with this precision, do not attempt to ride outdoors. Use caution when riding in new environments. Be careful when riding through doorways.
off; INMOTION SCV is capable to finish a full circle turning The INMOTION SCV shifts to Speed Mode when either side of the Footboard Mat is stepped on. Assist Mode is disabled and Sleep Mode is activated when the rider is leaning or shaking the Turning Shaft forward and backward at high frequency. Assist Mode is disabled and Sleep Mode is activated after INMOTION SCV has still for 2 minutes. See Section 2.6 SmartKey for more information on how to activate Assist Mode. 3.5.
3.6. Self-check Mode Self-check Mode allows you to run a thorough examination of your INMOTION SCV to see if any parameters have been shifted with by aging and environment. The INMOTION SCV will run tests under Self-check Mode and store the resulting data. Please refer to the smartphone app chapter in this manual for more information on self-check mode.
3.7. Safety Alerts The INMOTION SCV is equipped with multiple safety alerts. It is important to understand these alerts before you attempt to ride your INMOTION SCV. 3.7.1. Speed Limiter When you approach the maximum allowed speed for a given situation, the INMOTION SCV will push the handlebar back to slow you down. The following figure shows the process of speed limiter. When the INMOTION SCV pushes the handlebar back, stop leaning forward and slow down.
Continuing toaccelerate and rideagainst the Handlebar could cause injury or damage from loss of control, collisions, and falls. The speed at which the handlebar pushes back depends on a variety of factors including set-up speed limiter, terrain, Continuous climbing Motor temperature Riding on bumpy roads High Circuit temperature The moment it powers on Battery temperature too high or too low Low battery Continuous descending payload, and battery condition.
Never restart and ride your INMOTION SCV after it has indicated an empty Battery or performed a Safety Shutdown due to low Battery. The INMOTION SCV may not have enough power to keep you balanced, especially if you accelerate, which requiresmore power. If you restart and continue riding after a Safety Shutdown due to low Battery, you risk falling. Also, you risk damaging your Battery Pack, resulting in reduced Battery life and capacity.
Trying to get on when the angle is too great. 3.8. Lay the Footboard at a moderate angle first. Environmental Factors Affecting the Vehicle’s Performance 3.8.1. Riding Distance Riding distance per charge is greatly influenced by riding habits and environmental factors. The following chart shows factors that have great influence: Factors Road Condition Possible Causes Riding the INMOTION SCV on flat roads will increase riding distance per charge.
(≥50℃or 122 °F) while riding the INMOTION SCV will slow down automatically. The hotter the components are, the lower the speed will be. If the components get very hot (≥80℃ or 176 °F) while riding, the INMOTION SCV may activate a safety alert. You should stop riding immediately and wait until the components cool off before you continue your ride. 3.8.3. Riding in Cold Temperatures Too low temperatures will deteriorate component lubrication and increase resistance.
4. Using the Battery Pack This chapter describes how to charge and maintain your INMOTION SCV Battery Pack. 4.1. Parameters for the Battery Pack The following chart lists the specifications for the Battery Pack. Specifications Item Note ①The Battery type Lithium-ion Battery Charging Time About 5.5 Hours Voltage 72 V ① ②The Battery may not be charged when the Capacity 6 Ah temperatures below 0 ℃ (32 °F). Battery Pack Weight 3.5 ±0.1 Kg Dimensions 225*147*82 mm (8.8*5.8*3.
Do not use the Battery Pack if the casing is broken, emits an unusual odor or is excessively warm or leaks any substance. Follow the instructions for charging and storage, otherwise the Battery Pack could fully discharge over time, causing permanent damage. Charging time for the INMOTION SCV is about 3.5 hours. The charger will power off automatically after the Battery Pack is fully charged. Battery Packs can be charged about 500 times.
Only charge the Battery Pack using approved charging adapters. Use a grounded AC outlet and a charging cord that is in compliance with local standards. Keep the Charger, Charge Port, Power Cord and AC outlet clean and dry. Do not insert the plug if the Charge Port, Power Cord or AC Power outlet is wet. Do not heat up the Battery Pack or throw it into a fire. Do not use the Battery Pack in high temperatures. Keep the Battery Pack in a cool, dry place when storing.
4.3.1. Charging Indicator The Info LED shows the current Battery life. The Battery gauge blinks to indicate the Battery Pack is charging (for example, the fourth bar is flashing when the current Battery amount is at3 bars.). Failure to charge the Battery Pack properly could result in permanent damage. If the Battery Pack is excessively discharged, it could also cause serious damage. 4.4. Be sure to use the original charger for INMOTION charging.
4.5. Transporting Battery Pack When transporting your INMOTION SCV, protect the Battery Pack to avoid damage during shipment. Do not expose the Battery Pack to direct heat or moisture, and avoid heavy vibration during transportation. Do not use or transport a Battery Pack if the casing has brokenopen. Lithium-ion Battery Packs are considered Hazardous Materials under shipping regulations. Comply with all local, federal and individual country laws when transporting the INMOTION SCV Battery Pack.
5. Safe Riding INMOTION SCV is not only an intelligent and convenient vehicle, but also an entertaining and sport tool. Ride safely to enjoy the convenience and pleasure of the INMOTION SCV. Reminder—even if you follow the instructions in this User Manual strictly, once the INMOTION SCV is on public roads or property, you may still risk injury from other people’s bad riding behaviors. Be careful when riding the INMOTION on public property. 5.1.
Make sure the INMOTION SCV body is solid and intact before riding, and that there are no abnormal noises while riding. 5.2. Adjust the Turning Shaft to an appropriate height. Be aware of the traffic or objects ahead of you, and keep a clear view. Wear glasses or contact lens if needed for driving. Stay alert while riding and keep a safe distance from other people and transportation vehicles.
Pregnant women, heavy drinkers, medicating patients, cardiac patients, the children who are under 6, the disables and elders who are over 60 should not ride the INMOTION SCV. Do not ride the INMOTION SCV with both hands off the Turning Shaft. Do not press your body on the Handlebar. Do not move your foot off the Footboard Mat while riding the INMOTION SCV. If the rider gets off the vehicle improperly, the wheels will spin for about 2 seconds, which is not a failure but a protection.
You are 23 cm (9 inches) taller when riding the INMOTION SCV. Be careful with obstacles above you, such as door frames, branches, and signs. Be observant of your surroundings. Slow down when you are near other people, especially children, and let them pass first. Keep a safe distance from other SCV riders. Ride inline rather than side by side. Control your riding speed and make sure that you are able to stop at anytime.
Clean and perform routine maintenance on your INMOTION SCV regularly. 6. Operating and Maintaining Your INMOTIONSCV 6.1. Lifting Your INMOTION SCV The INMOTION SCV is designed to be lifted easily. Lift it from the Turning Shaft or the Grip. 6.1.1. Lifting your INMOTION SCV by the Turning Shaft Lift your INMOTION SCV using the Rubber Handle on the Turning Shaft. 6.1.2.
6.2. Cleaning Your INMOTION SCV Clean your INMOTION SCV: Make sure the INMOTION SCV is unplugged and powered off Make sure the Charging Port Cover is closed before cleaning Gently clean your INMOTION SCV with soap, water and a soft cloth Don’t allow water to get into the Charging Port. The INMOTION SCV is rated Dust protected under sealed conditionIP55 and protects against dust. But it is not waterproof, and should not be cleaned using a hose.
and tighten them. Check the bottom of the Tires to see if they are badly or unevenly worn. If they are, please contact us to replace them. Check the Handlebar periodically. Tilt the Handlebar fully left and then right. If it is loose, check the sockets and tighten them. Check the Quick Release Lock periodically. Tighten it if it is loose. Check that the ABS Shell is in good shape. Replace any part that is broken. Please contact Customer Care if you need further maintenance or replacements.
7. Troubleshooting the INMOTION SCV You can troubleshoot certain problems with your INMOTION SCV before contacting an Authorized INMOTION Dealer or Distributor, or INMOTION Customer Care. This chapter provides lists of problems and recommended actions.
7.1. Common Faults This list describes some common faults, the possible reasons, and recommended solutions. Code 27 Description Age Error Possible Causes The INMOTION SCV has reached its Recommended Action Stop using the INMOTION SCV lifetime expectancy. 29 Bluetooth Error Bluetooth Module Communication Failure Reconnect with Bluetooth, and restart INMOTION SCV 31 CAN Error Electric Circuit Failure Contact INMOTION Customer Care at service@imscv.
Pack, or Battery failure Battery failure, contact INMOTION Customer Care at service@imscv.com 47 Battery Discharge Battery Failure Contact INMOTION Customer Care at Error service@imscv.com 49 Low Battery Voltage Battery voltage is too low Recharge the Battery Pack 62 Abnormal Motor Motor temperature or environmental Stop using the INMOTION SCV and let it rest. 63 Temperature temperature is too high or too low Use the INMOTION SCV at the proper temperature.
7.3. Check the SmartKey to make sure the INMOTION SCV is not locked. If the INMOTION SCV can still not power on, remove the Battery Pack and then reinsert it. The INMOTION SCV Cannot Enter Balance Mode Recommended Action: Confirm the INMOTION SCV is powered on. Make sure the Turning Shaft is centered and the Footboard Mat is level. Confirm there is no weight on the Footboard Mat.
Step on the Footboard Mat and stand still. If the INMOTION SCV turns to one side automatically, activate Self-check Mode. Check the Tires and make sure they are not worn. If the Tires appear to be in good condition, activate Self-check Mode. 7.6. Use your INMOTION SCV Smartphone App to adjust steering sensitivity. The INMOTION SCV Cannot Power Off Recommended Action: Check the Footboard Mat to make sure there is nothing on it and that it is not stuck.
Manually search your INMOTION SCV SSID via the Append then connect. If the INMOTION SCV has BlueTooth module, please make sure there is no BlueTooth Module communication error. You can reconnect the BlueTooth module and restart INMOTION SCV. 7.8. No Alert Sounds Check whether you have mistakenly touched the express control on the Handlebar to turn off the alert sounds.
8. Contact and Legal Information 8.1. Report a Problem If you have any problems with your INMOTION SCV please contact INMOTION Customer Care at service@imscv.com. We are all ears to your suggestion and serve you wholeheartedly. 8.2. 8.3. How to Reach Us INMOTION Technologies Co., Ltd. Tel.:40000-1000-12 E-mail: service@imscv.com Obey All Laws and Regulations INMOTION SCV can be used as an intelligent and portable transporter, but SCV cannot replace current transportation.
64 / 64