User's Manual

16 / 17
6.4. Inflation & Exchange Inner and Outer Tires
Once there is insufficient air pressure, or there are different air pressures of the two tires, please timely inflate until both have the
same air pressure. Factory default tire pressure of INMOTION E-bike is 2.8Bar of the front wheel, and 2.5Bar the rear.
If the tire needs to exchange due to tire burst or other reasons, please contact INMOTION authorized agencies or INMOTION
after-sales department (Also you can repair it in a bicycle maintenance shop)
6.5. Brake Maintenance
① Insert the elbow to the brake, and fix it on the screw of the frame. According to the: direction of Left Loose and Right Tight,
please lightly turn left to make the brake a little loose.
② Then clench the brake with one of your hands, in order to make the rear brake close to the brake pad. Keep clenching.
③ Right press the brake with the elbow until fix and tighten the brake. Then loose the E-bike brake, the brake returns
automatically. It is not abrasive once the brake pad is correctly fixed.
① ② ③